Hi,we need your help regarding a problem with a CTL(CENTRE OF LASER TECHNOLOGY) 1401 CO2 AZURYT 10600nm-15w
At the startup the following error messages are shown:
E2: water flow error
E5: RF
E6: Temperature 1
E8: Fibre
We checked the unit and all the parts are working.
We would need the service password to check the settings of the unit from the protected area.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Zsolt Torok
CTL Laser
June 09, 2019 04:44
Hi,we need your help regarding a problem with a CTL(CENTRE OF LASER TECHNOLOGY) 1401 CO2 AZURYT 10600nm-15w
At the startup the following error messages are shown:
E2: water flow error
E5: RF
E6: Temperature 1
E8: Fibre
We checked the unit and all the parts are working.
We would need the service password to check the settings of the unit from the protected area.
Can anybody help us?
to rate and post a comment