Hi all, can you help me with adding new printer to CT LightSpeed and change the Ip and AE of the existing printer. How can i get to DICOM menu ?
Thanks
1.) Click on the SERVICE DESKTOP button.
2.) On the Desktop Toolbar select UTILITIES -> INSTALL -> INSTALL CAMERA. The LightSpeed Plus Install Camera window appears, along with a warning message pop-up box. To remind you that all filming queues must be empty before you begin to update or delete a camera.
3.) The Graphical User Interface displayed shows a list of cameras installed.
4.) Now you are asked a series of questions.
a.) To add a new camera, click the ADD button
b.) Now a dialog window for the camera type (DASM/DICOM) appears. If no DASM is detected during the OC boot, the DASM button will be disabled, If a DASM is present and has not been detected, re-boot the OC and run the camera configuration tool again.
5.) To add a new laser camera, click DASM in the camera type dialog box. This brings up a list of available camera models. Select the appropriate model form the list and click SELECT Now configure it.
6.) To add a new DICOM camera, click on ADD and then DICOM in the dialog box that appears.
7.) Advanced camera parameters control the image quality of films.
That's it.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Abu-Yusuf
DICOM MENU for CT LightSpeed
August 21, 2014 12:44
Hi all, can you help me with adding new printer to CT LightSpeed and change the Ip and AE of the existing printer. How can i get to DICOM menu ?
Thanks
to rate and post a comment
Raul Elizalde
re: DICOM MENU for CT LightSpeed
August 22, 2014 10:08
1.) Click on the SERVICE DESKTOP button.
2.) On the Desktop Toolbar select UTILITIES -> INSTALL -> INSTALL CAMERA. The LightSpeed Plus Install Camera window appears, along with a warning message pop-up box. To remind you that all filming queues must be empty before you begin to update or delete a camera.
3.) The Graphical User Interface displayed shows a list of cameras installed.
4.) Now you are asked a series of questions.
a.) To add a new camera, click the ADD button
b.) Now a dialog window for the camera type (DASM/DICOM) appears. If no DASM is detected during the OC boot, the DASM button will be disabled, If a DASM is present and has not been detected, re-boot the OC and run the camera configuration tool again.
5.) To add a new laser camera, click DASM in the camera type dialog box. This brings up a list of available camera models. Select the appropriate model form the list and click SELECT Now configure it.
6.) To add a new DICOM camera, click on ADD and then DICOM in the dialog box that appears.
7.) Advanced camera parameters control the image quality of films.
That's it.
IF you need moré details contact me.
ct_systems_ureca@yahoo.com.mx
to rate and post a comment