I have a 1800 model monitor dinamap which it tells me the client requires calibration, as was already entering the calibration mode, but which are not of the same parameters as the indicators to visualize and potentiometers to vary ... please if anyone has these procedures can help me.
Tengo un monitor dinamap model 1800 el cual por lo que me indica el cliente requiere calibracion, ya se como entrar al modo de calibracion pero nose cuales son lo parametros del mismo, los indicadores a visualizar y los potenciometros a variar... por favor si alguien tiene estos procedimientos que me pueda ayudar.
No conozco el modelo 1800, pero en el modelo plus existe un submenu donde te pide conectar un kit de calibracion, inflar hasta 200mmhg y presioner un boton para que el equipo calibre el span. No es por potenciometros
I don't know 1800 model, but at plus model there is a sub menu rutine that solicite you to connect calibration kit,inflate to 200mmhg and press a button to permit the unit to calibrate by itself. There are not rv for this
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
Wilfredo Rangel
Dinamap 8100
August 10, 2009 11:56
Dear Colleagues
I have a 1800 model monitor dinamap which it tells me the client requires calibration, as was already entering the calibration mode, but which are not of the same parameters as the indicators to visualize and potentiometers to vary ... please if anyone has these procedures can help me.
Thank you
Wil Rangel
JDS Technologies C.A
Caracas - Venezuela
Estimados colegas
Tengo un monitor dinamap model 1800 el cual por lo que me indica el cliente requiere calibracion, ya se como entrar al modo de calibracion pero nose cuales son lo parametros del mismo, los indicadores a visualizar y los potenciometros a variar... por favor si alguien tiene estos procedimientos que me pueda ayudar.
Gracias
Wil Rangel
Jds Technologies C.A
Caracas - Venezuela
to rate and post a comment
Jose Morillo
Re: Dinamap 8100
August 11, 2009 12:32
No conozco el modelo 1800, pero en el modelo plus existe un submenu donde te pide conectar un kit de calibracion, inflar hasta 200mmhg y presioner un boton para que el equipo calibre el span. No es por potenciometros
I don't know 1800 model, but at plus model there is a sub menu rutine that solicite you to connect calibration kit,inflate to 200mmhg and press a button to permit the unit to calibrate by itself. There are not rv for this
to rate and post a comment
Wilfredo Rangel
Re: Dinamap 8100
August 11, 2009 03:21
pardon me... is the model 8100 dinamap, dont 1800 is not
to rate and post a comment
Holger Fritze
Re: Dinamap 8100
August 13, 2009 10:05
push "set" and hold it, turn on, in the display"mad" it shows the cuff-pressure.
Holger
to rate and post a comment
Holger Fritze
Re: Dinamap 8100
August 13, 2009 10:05
push "set" and hold it, turn on, in the display"mad" it shows the cuff-pressure.
Holger
to rate and post a comment
Wilfredo Rangel
Re: Dinamap 8100
August 20, 2009 01:44
Thank you... Very well
to rate and post a comment