Hi everybody, I´m having problems with a GE senographe DMR+, it´s displaying the error "E86 Gantry: checksum error on battery saved memory 151/000" I about to change the battery, but I don´t know if this is enough or correct to solve the problem or if I have to re-calibrate the system, if so, I don´t know how to do it. Thanks.
after change the battery in the arm 800pl2 you have to recalibrate the compression force, because the parameters are lost, you can work in free thechnic but not in aec
Hi everyone please tell me what is the procedure to calibrate the compression force and dip sw b1settings on CPU board. Thanks My email id is deemi.nadeem@gmail.com nadeem@al-hudameditech.com
Hi everyone please tell me what is the procedure to calibrate the compression force and dip sw b1settings on CPU board. Thanks My email id is deemi.nadeem@gmail.com nadeem@al-hudameditech.com
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Janitzintzin Colin
DMR + E86 Error 151/000
January 09, 2012 09:35
Hi everybody, I´m having problems with a GE senographe DMR+, it´s displaying the error "E86 Gantry: checksum error on battery saved memory 151/000" I about to change the battery, but I don´t know if this is enough or correct to solve the problem or if I have to re-calibrate the system, if so, I don´t know how to do it. Thanks.
My email is medicapoli@gmail.com
to rate and post a comment
Alfred M. Brown
Re: DMR + E86 Error 151/000
January 10, 2012 05:27
E86 is an "Arm Checksum Error." You should have the message on your console "Memory contents changed."
to rate and post a comment
MIGUEL GONZALEZ
Re: DMR + E86 Error 151/000
January 17, 2012 09:31
after change the battery in the arm 800pl2 you have to recalibrate the compression force, because the parameters are lost, you can work in free thechnic but not in aec
to rate and post a comment
Jose Pinto
re: Re: DMR + E86 Error 151/000
December 14, 2012 12:14
Dear Miguel, I happen to have the same E86. Can you give me a hand on how to calibrate compresion force? Please write to amesys1@yahoo.com
to rate and post a comment
GILBERTO MAQUEDA
re: Re: DMR + E86 Error 151/000
September 06, 2013 08:13
hello I need your help, have you tell me how to recalibrate the compression force, thanks for you help
to rate and post a comment
Nadeem Hameed
re:Re: DMR + E86 Error 151/000
April 23, 2017 10:25
Hi everyone please tell me what is the procedure to calibrate the compression force and dip sw b1settings on CPU board.
Thanks
My email id is deemi.nadeem@gmail.com nadeem@al-hudameditech.com
to rate and post a comment
Leonel Soto
re: Re: DMR + E86 Error 151/000
May 08, 2019 10:20
Hi Mr. Miguel. Can I to calibrate via mammocom? Do you have the configuration of the conection cable RS232? My email is ljsotoc@gmail.com
to rate and post a comment
DMEDS
re: re: Re: DMR + E86 Error 151/000
May 17, 2019 08:51
i have all manuals for this system ,
if you need any contact me,
whatsapp : 00201001243217
mail : magmesme@gmail.com
thanks
regards
to rate and post a comment
Jose Pinto
re: DMR + E86 Error 151/000
December 14, 2012 12:14
Dear Collin, How did you solve this problem with error 86 on the DMR
to rate and post a comment
cesar lizarazo
re: re: DMR + E86 Error 151/000
April 10, 2015 03:40
hello , how do you fix this problem.?
to rate and post a comment
Nadeem Hameed
re:re: re: DMR + E86 Error 151/000
April 23, 2017 10:25
Hi everyone please tell me what is the procedure to calibrate the compression force and dip sw b1settings on CPU board.
Thanks
My email id is deemi.nadeem@gmail.com nadeem@al-hudameditech.com
to rate and post a comment