I have a dpx-IQ with ramping problem,the error log tell me a 80(+HVPS ou of range)I try with other pair of HVPS that ramping on other system, but here simply not work.Could be another thing?.
I am trying only with HVPS and HV cables out of receptacules of HVPS,and only try to apply KV, but the system not ramping,But repeat in other system that HVPS ramping, but cannot get good graph.
I have a problem on a DPX IQ presenting error HVPS. Which way can I go to repair? if you can help me send email to wcscavalcante@uol.com.br
Abs
Wilson.
Eduardo,
For the first case it might be any part of the HV system. X-ray tube, HVPS both, control cable, HV cables or even max and oink board. On the second case probably you have not connect properly the HVPS. I can not imagine anything else or a fuse has been blown.
Is your software version 4.7e? If yes please send me the error log to specify the problem.
maybe you can try ramping without x ray tube.
unplug x ray cables from the x ray tube and try ramping (be careful), you mus see arcing high voltage plugs. if not, you doesn´t have h.v. tension. if i can help you my email is siemeds@hotmail.com
I have a problem on a DPX IQ presenting error HVPS. Which way can I go to repair? if you can help me send email to wcscavalcante@uol.com.br
Abs
Wilson.
From skilled GE depot repairs to patient-ready accessories, Southeastern Biomedical specializes in GE to keep your facility safe, efficient, and cost-effective. 888-310-7322.
eduardo medina
DPX-IQ ramping problem
June 16, 2008 04:26
I have a dpx-IQ with ramping problem,the error log tell me a 80(+HVPS ou of range)I try with other pair of HVPS that ramping on other system, but here simply not work.Could be another thing?.
Any suggestions?
Eduardo
to rate and post a comment
Emerson Freire
Re: DPX-IQ ramping problem
June 16, 2008 06:18
You could have a tube problem...
to rate and post a comment
eduardo medina
Re: DPX-IQ ramping problem
June 17, 2008 09:20
I am trying only with HVPS and HV cables out of receptacules of HVPS,and only try to apply KV, but the system not ramping,But repeat in other system that HVPS ramping, but cannot get good graph.
to rate and post a comment
wilson cavalcante
re: Re: DPX-IQ ramping problem
May 15, 2014 08:04
I have a problem on a DPX IQ presenting error HVPS. Which way can I go to repair? if you can help me send email to wcscavalcante@uol.com.br
Abs
Wilson.
to rate and post a comment
ALEXANDER PILAFTSIS
Re: DPX-IQ ramping problem
June 17, 2008 03:20
Eduardo,
For the first case it might be any part of the HV system. X-ray tube, HVPS both, control cable, HV cables or even max and oink board. On the second case probably you have not connect properly the HVPS. I can not imagine anything else or a fuse has been blown.
Is your software version 4.7e? If yes please send me the error log to specify the problem.
to rate and post a comment
eduardo medina
Re: DPX-IQ ramping problem
June 17, 2008 09:23
tomorrow will send you error log. But I am only applying KV on static counter,with cables out of receptacules of PS. and not ramp.
thank you
to rate and post a comment
eduardo medina
Re: DPX-IQ ramping problem
June 18, 2008 10:45
Alexander i dont know to where send error log
Thank you
to rate and post a comment
Abel Cardona
Re: DPX-IQ ramping problem
June 20, 2008 10:54
maybe you can try ramping without x ray tube.
unplug x ray cables from the x ray tube and try ramping (be careful), you mus see arcing high voltage plugs. if not, you doesn´t have h.v. tension. if i can help you my email is siemeds@hotmail.com
to rate and post a comment
wilson cavalcante
re: DPX-IQ ramping problem
May 15, 2014 08:04
I have a problem on a DPX IQ presenting error HVPS. Which way can I go to repair? if you can help me send email to wcscavalcante@uol.com.br
Abs
Wilson.
to rate and post a comment