I am reviewing an EKG Cardiette Autoruler 12/1, the same wheel but not print the paper, it is no thermal head, though its design is in Style.
Style moves according to the referral at the time of this study, but apparently the Style does not have sufficient temperature to heat and mark the paper, my question is if anyone has any idea which of the five POT's which is on the card I move to calibrate the temperature ...
Wil Rangel
Caracas- Venezuela
Estoy revisando un EKG Cardiette Autoruler 12/1, el mismo rueda el papel mas no imprimes, no es de cabezal, a pesar de su diseño es de Style.
El Style se mueve en funcion a la derivacion que este al momento del estudio, pero al parecer el Style no tiene suficiente temperatura para calentar y marcar el papel, mi pregunta es si alguien tiene idea cual de los cincos POTS que se encuentra en la tarjeta debo mover para calibrar la temperatura...
You must have a very old recorder if it is using a hot stylus to write. I suggest you note the exact location of each pot and turn one at a time, with the recorder running and see which one darkens the print. If the pot does not affect the print, turn it back to where it was. Not a hard thing to do.
Good luck!
Joe Avina
AMERICAN INTERNATIONAL MEDICAL
15751 Roxford St. Unit J
Sylmar, CA 91342
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Wilfredo Rangel
EKG Cardiette problem
June 26, 2009 08:32
I am reviewing an EKG Cardiette Autoruler 12/1, the same wheel but not print the paper, it is no thermal head, though its design is in Style.
Style moves according to the referral at the time of this study, but apparently the Style does not have sufficient temperature to heat and mark the paper, my question is if anyone has any idea which of the five POT's which is on the card I move to calibrate the temperature ...
Wil Rangel
Caracas- Venezuela
Estoy revisando un EKG Cardiette Autoruler 12/1, el mismo rueda el papel mas no imprimes, no es de cabezal, a pesar de su diseño es de Style.
El Style se mueve en funcion a la derivacion que este al momento del estudio, pero al parecer el Style no tiene suficiente temperatura para calentar y marcar el papel, mi pregunta es si alguien tiene idea cual de los cincos POTS que se encuentra en la tarjeta debo mover para calibrar la temperatura...
Wil Rangel
Caracas- Venezuela
58 212 2659908
to rate and post a comment
Joe Avina
Re: EKG Cardiette problem
June 29, 2009 02:51
Wilfredo Rangel,
You must have a very old recorder if it is using a hot stylus to write. I suggest you note the exact location of each pot and turn one at a time, with the recorder running and see which one darkens the print. If the pot does not affect the print, turn it back to where it was. Not a hard thing to do.
Good luck!
Joe Avina
AMERICAN INTERNATIONAL MEDICAL
15751 Roxford St. Unit J
Sylmar, CA 91342
800*333*9111 toll free
818*362*7702 Phone
818*364*0960 Fax
www.aimcardio.com website
info@aimcardio.com email
to rate and post a comment