Any ideas as to why our beloved epilight has shut down with simmer error code 104 . Connection = short. We had some capacitor problems, replaced offending capacitor. Now one week later we have this problem
Hi Martin, the code error #94-95 is the following: Replace Switch Module. maybe, is the IGBT is short cicuit? revise betwen Emissor colector, Good is open ciscuit, bad is short circuit
Ophthalmic-focused expertise in YAG systems including repair, maintenance and calibration handled with precision by trained professionals. Request service • sales@laserlocators.com • 1-877-924-2020
peter martin
epilight simmer error
November 19, 2014 09:45
Any ideas as to why our beloved epilight has shut down with simmer error code 104 . Connection = short. We had some capacitor problems, replaced offending capacitor. Now one week later we have this problem
to rate and post a comment
Jose Nelson Gouveia Vogado
re: epilight simmer error
December 16, 2014 08:36
reemplace treatment head
to rate and post a comment
peter martin
re: re: epilight simmer error
June 13, 2016 10:18
That worked thank you.
Now I have a new problem. the machine has been shutting down with error code 94 - short . Any ideas?
to rate and post a comment
Jose Nelson Gouveia Vogado
re: re: re: epilight simmer error
June 13, 2016 12:24
Hi Martin, the code error #94-95 is the following: Replace Switch Module. maybe, is the IGBT is short cicuit? revise betwen Emissor colector, Good is open ciscuit, bad is short circuit
to rate and post a comment
peter martin
re: re: re: re: epilight simmer error
June 13, 2016 06:10
I think you are on the money again! It was, shutting down intermittently prior. After giving it a good clean inside , it would fire up.
to rate and post a comment