¡¡ Hello everybody!!
I have a problem on CT Somatom Plus 4 of Siemens, when I start-up system, it comming-up without problem, I can see this on display, but the gantry module never is completely ready and the lights of panel control are off, except both uper numerical displays .So, in the logbook system appears following error:
MAS_E20002e fct_comm-malfun(E 20 0 2e 0 59 22 4b)
I appreciate any comment to help me this problem, my e-mail: imesamex@prodigy.net.mx
Thanks
Pedro Zamora
ERROR CODE E20002e IN CT SOMATON PLUS 4
November 18, 2015 07:43
¡¡ Hello everybody!!
I have a problem on CT Somatom Plus 4 of Siemens, when I start-up system, it comming-up without problem, I can see this on display, but the gantry module never is completely ready and the lights of panel control are off, except both uper numerical displays .So, in the logbook system appears following error:
MAS_E20002e fct_comm-malfun(E 20 0 2e 0 59 22 4b)
I appreciate any comment to help me this problem, my e-mail: imesamex@prodigy.net.mx
Thanks
to rate and post a comment