I have problems with an AMX-4, and I need to now
the error code 456.
Probably a generator failure but what?
Hope someone can help me.
If someone has a copy of a complete error code list, I would be very great full.
ERROR 456
1.Check Ribbon Cable From 1 KHZ Board To CPU Board
2. Troubleshoot The 1 KHZ Board—Could Be BAD
3. Bad CPU Board
4. Bad Tap Relay(s) - Feedback
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
henrik Kjoelby
error codes for a AMX-4
August 09, 2008 03:32
I have problems with an AMX-4, and I need to now
the error code 456.
Probably a generator failure but what?
Hope someone can help me.
If someone has a copy of a complete error code list, I would be very great full.
Best Regards
Henrik Kjoelby
to rate and post a comment
Manuel Casanova
Re: error codes for a AMX-4
August 10, 2008 05:04
ERROR 456
1.Check Ribbon Cable From 1 KHZ Board To CPU Board
2. Troubleshoot The 1 KHZ Board—Could Be BAD
3. Bad CPU Board
4. Bad Tap Relay(s) - Feedback
to rate and post a comment
Staate Hayward
Re: error codes for a AMX-4
August 11, 2008 09:00
found on DotMed..
https://www.dotmed.com/forums/index.html?apply_filter=1&forum=3&cid=9368&tid=3810&key=amx4%20error
to rate and post a comment