Error in XC.

I have error from CT Alexion 16 Slice show below.

Error in XC.
code [0xb2640000] dev[0x00010002] Pno[0]
---------------------------------------------------------

---ERROR INF dump---
SSADI STATUS
ss_state [0x0010], valid_bit[0x000f]
GTS STATUS
mode[OR], exec[ED], error[0x00000000]
InterLock Slide[00], height[00], tilt[00]
InterLock LRside[00]
free&light[00], out2censor censor[00]
MUDAT status[0x0000]
censor information
3032303030303030
GTS DETAIL STATUS
detail error
40404040404040404040404040404040
40404040404040404040404040404040
DDmotor detail | error
30303030303030303030303030303030
slide error detail
3030303030000000
height error detail
303030303030303030303000
L/R side error detail
000000000000000000000000
l mudat error information
30303030303030303030303030303030
30303030303030303030303030303030
30303030303030303030303030303030
XC STATUS
mode[OR], exec[DR], error [0x1007f7d0]
XC DETAIL error
3f3f3f3f3f3f3f3f3f3f2f2f2f2f2f00

Thank for your advise
Toon
mka@informedgroup.net