CAN SOMEONE HELP ME WITH THIS ERROR ON A PHILIPS MX 8000
THE UNIT DOES THE WARM UP AND ALL BUT WHEN ITS GOING TO INITIATE WE GET GENERAL ERROR MESSAGE
AND THEN 34209825 S_MASTER_SEQUENCER_ACQ_NOT_OK
I worked once on these systems, the fiber optics is a good idea.
As well as the fiber optics connections on the gantry side, these systems have 2 FO receivers and multi optics transmitters in the rotating gantry, in such that at least one is on at time. Good luck.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Olga De La Paz
ERROR ON MX-8000
November 18, 2011 03:36
CAN SOMEONE HELP ME WITH THIS ERROR ON A PHILIPS MX 8000
THE UNIT DOES THE WARM UP AND ALL BUT WHEN ITS GOING TO INITIATE WE GET GENERAL ERROR MESSAGE
AND THEN 34209825 S_MASTER_SEQUENCER_ACQ_NOT_OK
WE DON’T HAVE THE MANUALS .
to rate and post a comment
sarmad hana
Re: ERROR ON MX-8000
November 18, 2011 04:43
check fiber optic cable from gantry to computer
to rate and post a comment
James Fower
Re: ERROR ON MX-8000
November 18, 2011 08:36
I worked once on these systems, the fiber optics is a good idea.
As well as the fiber optics connections on the gantry side, these systems have 2 FO receivers and multi optics transmitters in the rotating gantry, in such that at least one is on at time. Good luck.
to rate and post a comment
BINH PHAN
Re: ERROR ON MX-8000
November 18, 2011 10:21
Not data aquision!
check sign from DMC to Recon or Control link.
to rate and post a comment