Unsure-we are installing a GE Proteus in its place and are trying to reuse the existing unistruts-only changing the positions--and do not know for sure if the weight capacity is comparable to the unit that we had in there
Then the only way to verify if the unistrut is correct is to look at the GE OTS preinstallation manual and verify the installation of the present unistrut by measuring distance between mounted unistrut and bolt size. Typically older systems were heavier and most preinstalled unistrut exceeds recommend standards for newer systems. But to verify check the spacing and mounting of preexisting unistrut.
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Stephanie Clabo
Fischer HF X unit
January 15, 2013 03:42
Would like to know the weight of the overhead tube assembly--what the weight capacity of the unistruts must be to support the tube overhead
to rate and post a comment
Lenny Place
re: Fischer HF X unit
January 15, 2013 05:58
which OTS it can be GE, Siemens ....
to rate and post a comment
Stephanie Clabo
re: re: Fischer HF X unit
January 16, 2013 10:57
Unsure-we are installing a GE Proteus in its place and are trying to reuse the existing unistruts-only changing the positions--and do not know for sure if the weight capacity is comparable to the unit that we had in there
to rate and post a comment
Lenny Place
re: re: re: Fischer HF X unit
January 16, 2013 01:58
Then the only way to verify if the unistrut is correct is to look at the GE OTS preinstallation manual and verify the installation of the present unistrut by measuring distance between mounted unistrut and bolt size. Typically older systems were heavier and most preinstalled unistrut exceeds recommend standards for newer systems. But to verify check the spacing and mounting of preexisting unistrut.
to rate and post a comment