Unless you have a burner and the firmware you will not be able to do this and will have to buy a pre-programmed chip or entire board. If you have several identical systems you are servicing I believe you can read from one chip and burn it to another....good luck.
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
Emrah Kambak
Flexi DT Table
June 19, 2016 03:03
Hi Everyone..
how to install a firmware new chip on pwb interface board?
only chip was burned. i have empty chip but i havent firmware.
can anyone help me?
thanks...
to rate and post a comment
Chris Salberg
re: Flexi DT Table
June 20, 2016 10:08
Unless you have a burner and the firmware you will not be able to do this and will have to buy a pre-programmed chip or entire board. If you have several identical systems you are servicing I believe you can read from one chip and burn it to another....good luck.
to rate and post a comment