Your Email:
Juan M Maciel
fresenius 2008H problem
July 16, 2015 02:33
I have a fresenius 2008H with this problem, when dyalisis mode is run after 10 or 15 seconds stop and appear AIR legend in display. Somebody can help me??
to rate and post a comment
Lenny Place
re: fresenius 2008H problem
July 16, 2015 06:19
you could have an air leak. have you performed the Induced Positive Tests?
re: re: fresenius 2008H problem
July 21, 2015 06:09
air problem already fix it, I have problem with low conductivity (about 12.6). I change sensor board, need calibrate conductivity??
re: re: re: fresenius 2008H problem
July 21, 2015 06:31
do you need the service manuals? if so send me an email
re: re: re: re: fresenius 2008H problem
July 22, 2015 08:26
Already fix this problem, but need the manuals. Please give an email address.
July 22, 2015 08:27
The problem was solved, thank's. Sensor board was damaged.
Comprehensive medical imaging support. We supply essential parts & maintenance for most OEMs, buy/sell quality used equipment, and offer mobile rentals globally. Contact us: info@lasoimaging.com
Juan M Maciel
fresenius 2008H problem
July 16, 2015 02:33
I have a fresenius 2008H with this problem, when dyalisis mode is run after 10 or 15 seconds stop and appear AIR legend in display.
Somebody can help me??
to rate and post a comment
Lenny Place
re: fresenius 2008H problem
July 16, 2015 06:19
you could have an air leak. have you performed the Induced Positive Tests?
to rate and post a comment
Juan M Maciel
re: re: fresenius 2008H problem
July 21, 2015 06:09
air problem already fix it, I have problem with low conductivity (about 12.6). I change sensor board, need calibrate conductivity??
to rate and post a comment
Lenny Place
re: re: re: fresenius 2008H problem
July 21, 2015 06:31
do you need the service manuals? if so send me an email
to rate and post a comment
Juan M Maciel
re: re: re: re: fresenius 2008H problem
July 22, 2015 08:26
Already fix this problem, but need the manuals. Please give an email address.
to rate and post a comment
Juan M Maciel
re: re: fresenius 2008H problem
July 22, 2015 08:27
The problem was solved, thank's. Sensor board was damaged.
to rate and post a comment