Ampronix, a Top Master Distributor for Sony Medical, provides Sales, Service & Exchanges for Sony Surgical Displays, Printers, & More. Rely on Us for Expert Support Tailored to Your Needs. Email info@ampronix.com or Call 949-273-8000 for Premier Pricing.
Gabriel Dávalos
GE 800T Senographe problem
September 20, 2010 08:39
All boards seems ok, except the console, don't shows any character or error code and emit a continuous beep, the internal console voltage regulator seems ok +5.05 vcc, any suggest? eeprom erased? microcontroller burned?
to rate and post a comment
Staate Hayward
Re: GE 800T Senographe problem
September 20, 2010 10:28
Power supply error, by "continuous" do you mean "constant one second interval"? On older rectanglular console. Three position rotating switch at end / edge of the console near the cable connector in the incorrect ("Unused") position. Normal position is "Left", "Center" is "self test", "Right" is "Unused". On newer rounded consoles a sequence of buttons must be pushed to go into the console self test.
to rate and post a comment
Gabriel Dávalos
Re: GE 800T Senographe problem
September 21, 2010 02:30
Continuous, without intervals,the position of S1 is correct (application mode), i exchanged the console and all works fine, I check G1, the internal DC regulator and read 5.05vcc, all the others components receive voltage (B12, B18 etc.),have you experience repairing consoles? any suggest..Thanks.
to rate and post a comment
yuan bo
Re: GE 800T Senographe problem
September 21, 2010 08:01
i have the service manual and install software, if you need any help, contact obnauy@163.com
to rate and post a comment
Alfonso Nino
Re: GE 800T Senographe problem
October 03, 2010 08:47
Can you send me a copy of the manual and isntall sofware by mail? to: servicios.ve@gmail.com.
Best regards,
Alfonso Niño
Caracas Venezuela
to rate and post a comment
francisco garcia
re: Re: GE 800T Senographe problem
October 19, 2016 06:43
Hi,
Please do You have Mammocom program?
Thanks.
to rate and post a comment