Can anybody help with a problem I am experiencing with a AMX-4PLUS.
Symptom: Does not get past test block 4, it also indicates that I can drive only & to charge batteries.
I have entered the Diagnostics & re-charged the batteries (even though they originally measured 114volts), however the bargraph only indicates 2 bars even after charge.
The same original problem (stops at block 4 etc.), remains.
Can anybody help.
Rick Smith
rsmith@neutronx-ray.com.au
I would reccomend trying to calibrate the charge board. then reccomend that you calibrate the entire system. if its failing the checksum, retrieve the error code from the diagnostics.
If you have 114v at the batteries and only 2 bars lit on the battery indicators, sounds like ya have to calibrate the voltmeter. Do a full system cal would be best
Brand new OEM Philips & Siemens Parts at unbeatable prices shipping domestically and Includes warranty!
Email P/N for pricing: sales@Relaxationinc.com
(P) 813-925-1314, www.relaxationinc.com
Rick Smith
GE AMX-4Plus problem
March 06, 2009 12:34
Can anybody help with a problem I am experiencing with a AMX-4PLUS.
Symptom: Does not get past test block 4, it also indicates that I can drive only & to charge batteries.
I have entered the Diagnostics & re-charged the batteries (even though they originally measured 114volts), however the bargraph only indicates 2 bars even after charge.
The same original problem (stops at block 4 etc.), remains.
Can anybody help.
Rick Smith
rsmith@neutronx-ray.com.au
to rate and post a comment
daniel dougert
Re: GE AMX-4Plus problem
March 06, 2009 12:01
hi rick,
I would reccomend trying to calibrate the charge board. then reccomend that you calibrate the entire system. if its failing the checksum, retrieve the error code from the diagnostics.
to rate and post a comment
Jose Vallejos
Re: GE AMX-4Plus problem
March 06, 2009 02:24
this is real, you need calibrate system, if need aditional information please tell me, javv2005@hotmail.com
to rate and post a comment
Brian Tressa
Re: GE AMX-4Plus problem
March 17, 2009 01:38
If you have 114v at the batteries and only 2 bars lit on the battery indicators, sounds like ya have to calibrate the voltmeter. Do a full system cal would be best
to rate and post a comment