I have seen the photos on the whatsapp you sent me.
To run this diagnostic, disconnect all the devices from SCSI and go testing on by one. Probably your problems is with the Serial Exp. Start with this.
You told me you have another machine to take parts, try this part first.
The other problem you sent me the photos, maybe you have another bad disk. Was The format successful ??
Ophthalmic-focused expertise in YAG systems including repair, maintenance and calibration handled with precision by trained professionals. Request service • sales@laserlocators.com • 1-877-924-2020
Jose Augusto
Ge CTe device 4 error
January 25, 2016 09:59
Hy,
I'm able to "run diagnostic" and all are passed except "SCSI test" with this error message :
Device 4 failed DMA test.
error code =IP32.08.0c.01.04,W1=00000001, W2=00000010
Can`t load media to instal SW.
Any body help me?
to rate and post a comment
Edurado Madeiros
re: Ge CTe device 4 error
January 26, 2016 09:43
Are you have O2 computer? If yes i can help you. Email me ermsismed@gmail.com
to rate and post a comment
Gustavo Gnecco
re: Ge CTe device 4 error
January 26, 2016 09:44
Hi Junior,
I have seen the photos on the whatsapp you sent me.
To run this diagnostic, disconnect all the devices from SCSI and go testing on by one. Probably your problems is with the Serial Exp. Start with this.
You told me you have another machine to take parts, try this part first.
The other problem you sent me the photos, maybe you have another bad disk. Was The format successful ??
Let me know.
Gustavo.
www.emsts.com.br
to rate and post a comment