Hi
I have got "power test failed error" on Ge CTe unit. A red colored window appears on startup routine which shows "ProSpeed Auto-Start Disabled", prospeed applications do not autostart after system configuration changes"
On power on test appears;
Raw data - error
Re host - error
" power on test failed"
how to solve the issue? any help will be appreciated!
Thank you!
The system do not auto start after you made changes on the config (as the messages says)
Someone made changes to the system ?? Reconfig ??
Most important is to know what have been changed and why
Was it working before the changes ??
Do you have a working SaveState ??
Dear Gustavo
Thank you for reply! As much as I know, there were a lot of "99 99 99 99 ...." message on the screen and the unit unable to boot. Therefor hard disks replaced with new ones by other service. They retrieved the backup of the unit. I found the unit as I described above
What type of console do you have ?? With the two Small Chineses PCs ??
Are Both HDs recognized on the BIOS ??
Have you tried to do LFC (Load from Cold) ???
yes there are 2 small chinese pcs. Both disks recognizes on the main pc. Recon pc has "disk boot failure message (when I plug a monitor) I checked its bios, the first boot device is "Lan" but no lan boot. How to load from cold? Thank you very much for valuable support!
ayahali
ge cte power on test failed
October 13, 2014 04:55
Hi
I have got "power test failed error" on Ge CTe unit. A red colored window appears on startup routine which shows "ProSpeed Auto-Start Disabled", prospeed applications do not autostart after system configuration changes"
On power on test appears;
Raw data - error
Re host - error
" power on test failed"
how to solve the issue? any help will be appreciated!
Thank you!
to rate and post a comment
Gustavo Gnecco
re: ge cte power on test failed
October 14, 2014 10:14
The system do not auto start after you made changes on the config (as the messages says)
Someone made changes to the system ?? Reconfig ??
Most important is to know what have been changed and why
Was it working before the changes ??
Do you have a working SaveState ??
to rate and post a comment
ayahali
re: re: ge cte power on test failed
October 14, 2014 02:30
Dear Gustavo
Thank you for reply! As much as I know, there were a lot of "99 99 99 99 ...." message on the screen and the unit unable to boot. Therefor hard disks replaced with new ones by other service. They retrieved the backup of the unit. I found the unit as I described above
to rate and post a comment
Gustavo Gnecco
re: re: re: ge cte power on test failed
October 14, 2014 04:38
What type of console do you have ?? With the two Small Chineses PCs ??
Are Both HDs recognized on the BIOS ??
Have you tried to do LFC (Load from Cold) ???
to rate and post a comment
ayahali
re: re: re: re: ge cte power on test failed
October 15, 2014 04:18
yes there are 2 small chinese pcs. Both disks recognizes on the main pc. Recon pc has "disk boot failure message (when I plug a monitor) I checked its bios, the first boot device is "Lan" but no lan boot. How to load from cold? Thank you very much for valuable support!
to rate and post a comment
Gustavo Gnecco
re: re: re: re: re: ge cte power on test failed
October 16, 2014 01:21
Write down your email so I can help you further.
to rate and post a comment
ayahali
re: re: re: re: re: re: ge cte power on test failed
October 16, 2014 08:19
cigiz_ali@yahoo.com
i appreciate your help! thank you!
to rate and post a comment
Lin Dong
re: ge cte power on test failed
October 14, 2014 10:14
Hi
The problem may come from O2 computer and its interfaces. you can do O2 hardwares test seperately
to rate and post a comment
ayahali
re: re: ge cte power on test failed
October 14, 2014 02:30
Dear Iin dong,
could you please guide me how to do separate O2 hardwares test?
Thanks!
to rate and post a comment
ayahali
re: re: re: ge cte power on test failed
October 15, 2014 04:18
I am going to install windows operation system to check if the recon pc hardware ok or not. I guess this was you mean.
to rate and post a comment
Gustavo Gnecco
re: re: re: re: ge cte power on test failed
October 16, 2014 01:21
I believe that was not what he means
Don't waste your time installing windows on Recon. Problably, your problem is not with the recon harware.
Write down your email so I can help you further.
to rate and post a comment
Galal
re: ge cte power on test failed
December 28, 2014 01:15
Make sure the bios is correct then make LFC and see what will happen . Same problem I faced in the past .
to rate and post a comment
Galal
re: ge cte power on test failed
December 28, 2014 01:15
99 99 99 99 means that HDs are bad or the OS is not loaded correctly >> enggalal.ha@gmail.com
to rate and post a comment
abhishek_radio
re: ge cte power on test failed
December 23, 2016 10:16
hiii
same problem i am face now plz say how to solve it....
same error show and rehost error show....
to rate and post a comment
Galal
re: re: ge cte power on test failed
December 27, 2016 10:15
make LFC , SW problem
to rate and post a comment