Dear colleagues ,
I have CTe with IRIX O2 operating Console.
The autovoice is not working at the protocols when do x-ray(if you activate the auotovoice you have no permision to x-ray,so we must cancel the autovoice inorder to give x-ray)-also at the protocol management you can not record or call the recorded first 3 lines (suspension,inspiration,expiration) .the 20 lines we get them but empty lines .I changed the Rear CN1 assy with no results.
I have a second problem that the CD,and two MOD(3.5 and 5.25 inch) are not working -at the service SCSI test the 3 give :
device not ready
At the HINV test I get an error no BIT3 Exp cards found ,so I checked the power cable from the NPD to the PCI back plane,it is ok.I think that I must reload the sw to the HD which I can not do it because the 3 peripherals are not working.any help will be appreciated .
We work with hospitals providing reliable ultrasound systems, probes & parts. By offering sales, service, rentals & repairs, we help our clients access high quality imaging systems while keeping costs low & support simple. Please call 760-834-4777!
Marwan Kumsie
GE CTe problem
December 14, 2015 08:37
Dear colleagues ,
I have CTe with IRIX O2 operating Console.
The autovoice is not working at the protocols when do x-ray(if you activate the auotovoice you have no permision to x-ray,so we must cancel the autovoice inorder to give x-ray)-also at the protocol management you can not record or call the recorded first 3 lines (suspension,inspiration,expiration) .the 20 lines we get them but empty lines .I changed the Rear CN1 assy with no results.
I have a second problem that the CD,and two MOD(3.5 and 5.25 inch) are not working -at the service SCSI test the 3 give :
device not ready
At the HINV test I get an error no BIT3 Exp cards found ,so I checked the power cable from the NPD to the PCI back plane,it is ok.I think that I must reload the sw to the HD which I can not do it because the 3 peripherals are not working.any help will be appreciated .
to rate and post a comment
Carl Frank
re: GE CTe problem
December 15, 2015 08:13
What software version are you running? Are you sure you have a CTe and not a CTi?
to rate and post a comment
Marwan Kumsie
re: re: GE CTe problem
December 15, 2015 05:06
Dear Carl,
Yes it is CTe single slice and SW as I remember 6.5
Thanks for your help
to rate and post a comment