Hi guys, I've got these following error codes... after changing the JEDI tank (the one on the right side looking at the Xray tube on top of the gantry), getting the x ray tube serviced (it had an air bubble), I checked HV cables, rotor and filaments of the tube, and they all are good.
1. XG Error
Code: 60-0317H
Exposure error: Spit Ratio error
2. Host: CTSJNV
Code: 20-1001-43
Error detected by: OGP
HV ON was activated by JEDI on Scout Scan after EXPCMD was activated
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
FranciscoG
GE HighSpeed
August 12, 2016 09:31
Hi guys, I've got these following error codes... after changing the JEDI tank (the one on the right side looking at the Xray tube on top of the gantry), getting the x ray tube serviced (it had an air bubble), I checked HV cables, rotor and filaments of the tube, and they all are good.
1. XG Error
Code: 60-0317H
Exposure error: Spit Ratio error
2. Host: CTSJNV
Code: 20-1001-43
Error detected by: OGP
HV ON was activated by JEDI on Scout Scan after EXPCMD was activated
Has someone had something like this before?
to rate and post a comment
FranciscoG
re: GE HighSpeed
January 30, 2017 10:23
Thanks guys, I had a bad JEDI tank.
to rate and post a comment