Hi Bens.
may be you have problem wiht the Bit3 card on Indigo2 or Octane computer depend of the system version, Bit3 cable or MVME host cardt or BIT3 card in SBC.
run the command hinv in the system monitor and check your card's if every is ok try to log in to the SBC use the command cu sbc (unix shell).
Good luck.
Ing. Julio C. Gomez
pruebadecampo@yahoo.es
Veracruz, Mexico.
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
bens prado
GE HIspeed CTi
September 27, 2012 12:21
Good day.
Cti systems could not boot-up up to applications level. SBC does not response successfully when i do ping.
What could be the possible problems and solutions?
Thank you
to rate and post a comment
Julio c. Gomez
re: GE HIspeed CTi
September 28, 2012 08:26
Hi Bens.
may be you have problem wiht the Bit3 card on Indigo2 or Octane computer depend of the system version, Bit3 cable or MVME host cardt or BIT3 card in SBC.
run the command hinv in the system monitor and check your card's if every is ok try to log in to the SBC use the command cu sbc (unix shell).
Good luck.
Ing. Julio C. Gomez
pruebadecampo@yahoo.es
Veracruz, Mexico.
to rate and post a comment
Awodem Alain
re: re: GE HIspeed CTi
September 29, 2012 09:16
Cancel application startup, from UNIX SHELL window and type cu sbc.
to rate and post a comment