We offer reliable & cost-effective spare parts for the Philips Achieva 1.5T MRI system helping you minimize downtime & keep operations smooth. Wide inventory available. Quick turnaround time. Expert support. Worldwide delivery. Contact Limor@elsmed.com
Elias Valdes
GE HiSpeed ZXi error
April 03, 2008 02:31
Hello:
Recently reinstalled, after 6 months without use, a GE HiSpeed ZXi CT scanner had the following situation. After performing the Tube conditioning and calibration process, and after a few axial scans, everything without any problems or errors, we got the following errors:
XG Error, Error 186218
Phase is 5 code is 60
Detail Error Code 60-0317H
Exposure Error: Spit Ratio Error
Then every time we try to make a scan, either axial, stationary or scout and with any technique we got the following error:
XG Error, Error: 186218
Phase is 5 code is 60
Detail Error Code 60-0319H
Exposure Error: KV Unbalanced Detected
We performed the No Load Test, and without the High Voltage Cables connected to the HV Tank, we got a Heater Error and the 60-319H KV Unbalanced Detected Error, being this the error we're getting always.
I will appreciate any help that could be provided.
Thank you all.
Elias Valdes
to rate and post a comment
Alan Ehrlich
Re: GE HiSpeed ZXi error
April 03, 2008 10:02
SEND US A EMAIL TO aje1214@yahoo.com
Alan Ehrlich
to rate and post a comment
Ricardo Faria
Re: GE HiSpeed ZXi error
April 03, 2008 06:07
Dear Friend,
Please check error on Ct's HV tank.
The first error is usually any problem cause by sparks inside the x-ray housing. Normally, a X-ray tube revitalization will fix that.
Please check the schematics about the final stage before the x-ray tube, KV boards, ect.
Please let me know about your sucessful.
regards:
ENG. Ricardo Faria
EMG- Brazil
to rate and post a comment
R.K.S singh
Re: GE HiSpeed ZXi error
April 04, 2008 01:32
dear
my self rohit singh CT ENGG I GOT SAME ERROR IN GE HISPEED FX/i I GOT SAME PEOBLEM I CHANGE TUBE AND JEDI BOTH HAVING PROBLREM Then i slove the problem if ur two parts r faulty then its deficault to diagnostic
to rate and post a comment
Elias Valdes
Re: GE HiSpeed ZXi error
April 09, 2008 12:14
Thank you all, in fact it's difficult to diagnose if it's only the tube or the HV Tank or both.
to rate and post a comment
toufik alkousa
Re: GE HiSpeed ZXi error
May 12, 2008 05:07
I have all manuals you may need for this system if you are interested plese contact me on: kousa@lycos.co.uk
to rate and post a comment
Fabio Ferreira
re: GE HiSpeed ZXi error
February 24, 2014 10:05
i got the same error. solved you?
to rate and post a comment
nilo panlilio,jr
re: GE HiSpeed ZXi error
February 27, 2014 01:12
replace xray tube and hv tank
to rate and post a comment