If it did not recognize it, log in as a root, install 2nd disk then reboot login again as a root and do a image database reset.
It is recommended that you load from cold with new OS hard drive them install 2 disk.
re: re: re: re: GE LightSpeed Plus - STORELOG issue
June 01, 2015 04:05
Hi Luis,
So everytime I change the 2nd hard drive (not the OS hard drive) is recommended to LFC, because I've logged in as root and restart the computer a few times. Thanks man!
re: re: re: re: re: GE LightSpeed Plus - STORELOG issue
June 02, 2015 10:10
It is recomendé when you have the seen errors.
you can check the SYSLOG in /var/adm By typing more /var/adm/SYSLOG for errors on hard drives, the error will tell you Wichita hard drive
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
FranciscoG
GE LightSpeed Plus - STORELOG issue
May 28, 2015 01:31
Hi guys,
I've been trying to perform a STORELOG command on the system, and it sends me a PANIC message:
******
PANIC: CPU 1: KERNEL FAULT
PC: 0xa80000002021f130 ep:0xffffffffffffb898
EXC code:128, 'Software detected SEGV '
Bad addr: 0x0, cause: 0x8
to rate and post a comment
Dean Kenney
re: GE LightSpeed Plus - STORELOG issue
May 30, 2015 08:07
There's more issues I'm sure but you hard drive has some issues
to rate and post a comment
FranciscoG
re: re: GE LightSpeed Plus - STORELOG issue
May 31, 2015 09:48
Thanks Dean,
I even changed the Image Disk Drive, but the system didn't recognize it.
I'm still not sure what is the issue, just that I can not delete information from the Image Disk that is inside.
to rate and post a comment
Luis Santos
re: re: re: GE LightSpeed Plus - STORELOG issue
June 01, 2015 08:48
If it did not recognize it, log in as a root, install 2nd disk then reboot login again as a root and do a image database reset.
It is recommended that you load from cold with new OS hard drive them install 2 disk.
to rate and post a comment
FranciscoG
re: re: re: re: GE LightSpeed Plus - STORELOG issue
June 01, 2015 04:05
Hi Luis,
So everytime I change the 2nd hard drive (not the OS hard drive) is recommended to LFC, because I've logged in as root and restart the computer a few times. Thanks man!
to rate and post a comment
Luis Santos
re: re: re: re: re: GE LightSpeed Plus - STORELOG issue
June 02, 2015 10:10
It is recomendé when you have the seen errors.
you can check the SYSLOG in /var/adm By typing more /var/adm/SYSLOG for errors on hard drives, the error will tell you Wichita hard drive
to rate and post a comment