We offer reliable & cost-effective spare parts for the Philips Achieva 1.5T MRI system helping you minimize downtime & keep operations smooth. Wide inventory available. Quick turnaround time. Expert support. Worldwide delivery. Contact Limor@elsmed.com
Paulo Ferreira
GE Logiq e software
October 03, 2013 06:25
Hi.
I need GE Logiq e software version R5.2.2.
Can anyone help me please?
Regards,
paulo.ferreira@astrimed.pt
to rate and post a comment
Lenny Place
re: GE Logiq e software
October 05, 2013 09:06
I will upload a copy and send to you via Google drive it will take about a hour to upload it is 1.8GB
to rate and post a comment
Paulo Ferreira
re: re: GE Logiq e software
October 07, 2013 08:55
Thank you Lenny. I will wait for the upload. Thanks for your support.
to rate and post a comment
Victor Patrick
re: re: GE Logiq e software
April 02, 2014 08:02
Hello Lenny. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
Lenny Place
re: re: re: GE Logiq e software
October 18, 2015 12:09
Yes I will zip and upload it
to rate and post a comment
Mostafa Kamel
re: re: re: re: GE Logiq e software
October 20, 2015 08:46
Hi Lenny,
Thanks a lot for your email. I do appreciate it.
So I shall just burn it on a DVD and boot from it, or there is any special instructions ?
Thanks
Mostafa
to rate and post a comment
Lenny Place
re: re: re: re: re: GE Logiq e software
October 20, 2015 12:41
yes unzip it then copy just the files in the folder to a DVD.
to rate and post a comment
Jose Daniel Garcia
re: re: re: re: GE Logiq e software
September 11, 2018 09:24
Leny pleace a need a copy thanks. danielgar4@hotmail.com
to rate and post a comment
Mostafa Kamel
re: re: GE Logiq e software
October 17, 2015 10:21
hi Lenny, I need that software too. can you send it to me.
Thanks
mostafa
mmmkamel@gmail.com
to rate and post a comment
Umid Khan
re: re: GE Logiq e software
March 30, 2016 08:21
Hi Lenny
Can you send me also 5.2.2. Version?
umedicals@gmail.com
to rate and post a comment
Lenny Place
re: re: re: GE Logiq e software
March 30, 2016 10:45
yes it will take some time to upload
to rate and post a comment
Pablo J Monzon
re: re: re: GE Logiq e software
August 26, 2018 11:29
Lenny, Please I have the same problem, I need a Logiq e software compatible with Win-10,can you send me? please Help.
pmonzon1@gmail.com
to rate and post a comment
Umid Khan
re: re: GE Logiq e software
March 30, 2016 12:40
Hi Lenny
Can you send me also 5.2.2. Version?
umedicals@gmail.com
to rate and post a comment
Marco Fonseca
re: re: GE Logiq e software
September 28, 2016 05:35
Sorry Lenny... can you re-send to me also?!
Thanks ;)
Marco
to rate and post a comment
Pablo J Monzon
re: re: re: GE Logiq e software
August 27, 2018 11:09
Hello Marco, I read that you send to Lenny for GE Logic e Software, please if you receive it, please resend to me
.
pmonzon1@gmail.com
to rate and post a comment
Lenny Place
re: re: re: re: GE Logiq e software
August 27, 2018 04:15
I am sending it
to rate and post a comment
Marco Fonseca
re: re: GE Logiq e software
September 28, 2016 05:35
Hi Lenny,
Can you re-send it to me too?
Thanks,
Marco (maarku@gmail.com)
to rate and post a comment
Lenny Place
re: re: re: GE Logiq e software
September 29, 2016 08:15
Okay it is going to take some time but I will add you to the folder
to rate and post a comment
Lenny Place
re: re: re: GE Logiq e software
September 29, 2016 08:15
i tried but I have such terrible internet service right now traveling it shows it will 15 hours
to rate and post a comment
José Calixto Miziara Neto
re: re: re: re: GE Logiq e software
May 10, 2017 04:31
Can you send me? informabnetworks@gmail.com
to rate and post a comment
Ron Reed
re: re: re: re: GE Logiq e software
August 14, 2018 10:14
Hello Lenny. I have a customer with the Logiq E portable ultrasound that has crashed. They said the version they had 4.0.4. Will the newer version work and can i get google drive upload for email address:
ron@dataviewimaging.com?
Thanks,
Ron Reed
to rate and post a comment
Lenny Place
re: re: re: re: re: GE Logiq e software
August 14, 2018 04:28
I only have 5.2.2 and it should work. I am sending it to using a site called myairbridge
to rate and post a comment
José Calixto Miziara Neto
re: re: GE Logiq e software
May 07, 2017 04:25
Can you send me? informabnetworks@gmail.com
to rate and post a comment
Luciano de Carvalho
re: re: GE Logiq e software
September 20, 2017 03:06
Hi Lenny! Could you send me also 5.2.2. Version or higher?
lcmundim@gmail.com
Thanks
to rate and post a comment
Isaac Villarreal
re: re: GE Logiq e software
April 17, 2018 09:52
Hello Lenny. I need the software for a GE Logiq e I recently purchase. Please if you or someone can direct me to a download link, i will really appreciat it. Thank You in advance.
to rate and post a comment
Jose Daniel Garcia
re: re: GE Logiq e software
August 31, 2018 04:31
Hello good afternoon, you can send me instructions to get that software danielgar4@hotmail.com.
Thanks.
to rate and post a comment
Jose Daniel Garcia
re: re: GE Logiq e software
August 31, 2018 04:31
Hello good afternoon, you can send me instructions to get that software. danielgar4@hotmal.com
to rate and post a comment
Jose Daniel Garcia
re: re: GE Logiq e software
September 11, 2018 09:24
Lenny Place I need a copy. pleace danielgar4@hotmail.com
to rate and post a comment
Jose Daniel Garcia
re: re: GE Logiq e software
September 19, 2018 08:22
Hi Lenny
If you can help me ? I need a logiq e software copy.
Thank you danielgar4@hotmail.com
to rate and post a comment
Victor Patrick
re: GE Logiq e software
April 02, 2014 08:02
Hello Paulo. I have a Ge Logiq e that was working OK, however, on the main screen at the right lower corner the DataFlow does not recognize the Int-HD. Please give some tip how to make the HD back to DataFlow.Is this a sign of death HD?
Victor Rincon
Dallas
Tel 214-493-8613
to rate and post a comment
Lenny Place
re: re: GE Logiq e software
April 02, 2014 01:51
Have you tried to restore the configuration backup. how full is the database?
to rate and post a comment
Cristian Fernandez
re: re: re: GE Logiq e software
February 10, 2017 10:23
I ereryone, I need software for logiq e version 6.0.2. Can you help me?
to rate and post a comment
Isaac Villarreal
re: re: re: re: GE Logiq e software
May 05, 2019 04:25
Hello, did you find the R6.0.2 software?
to rate and post a comment
UltraServiceMed
re: re: re: re: re: GE Logiq e software
May 13, 2019 10:36
If you are looking for the software am more than happy to help you out. mail me at info@ultraservicemed.com or ultraservicemed.com
to rate and post a comment
Pablo J Monzon
re: GE Logiq e software
August 26, 2018 11:30
Hi Paulo, can you help me, I looking a viewer for Logiq e compatible Win-10 or other.
to rate and post a comment
Gipin Babu
re: re: GE Logiq e software
September 22, 2018 07:27
i didnt get what you mean by that , logiq e runs with windows xp as base or older versions of windows.if you want software that you can directly install to the system please do contact me at gipin93@gmail.com
to rate and post a comment
tomios
re: GE Logiq e software
March 28, 2023 11:32
Hello I need disk image for Logiq E version R5.2.2. Anyone have it? Thx
to rate and post a comment