Over 500 Total Lots Up For Auction at One Location - NJ 06/15

GE Logiq P5 Boot up problem

Tags: Ultrasound, GENERAL ELECTRIC

Posted by an Anonymous User

GE Logiq P5 Boot up problem

May 26, 2014 12:40

Dear Friends
I was checking a US machine that has the problem of booting,
when switch the machine on on the display monitor appears the message Bios and some numbers, then disppears this and the screen is completelly dark maybe a little blue and nothing else, I suspect fo the HDD but no sure because i also think that the Power suppply is also bad due to i only have the four leds uppermost lit and according to manual i also shoult have the 80 dvc on and it is dark.
any help or suggestions would be appreciated
annorys1971@att.net.mx

1 person liked this
Log inor Register

to rate and post a comment

(195)
(47)
(4)

EROTOKRITOS SKENTOS

re: GE Logiq P5 Boot up problem

May 27, 2014 10:20

The Logiq P5 propably does not have a problem with the power supply.I repair a lot of power supply s from P5 but when they are diffective you do not have the 4 leds lit and the P5 is not opening at all or it opens but the 2 last leds is not lit and you do not have echo in the image.I believe you have either a bad HDD or an empty cpu battery.

1 person liked this
Log inor Register

to rate and post a comment

(174)
(8)
(31)

Hipolito Jorge Iglesias

re: re: GE Logiq P5 Boot up problem

May 28, 2014 08:32

Dear Erotokritos,
I think you are rigth, i also suspect the HDD but not a Battery problem as i checked it. do you know if it is possible to get a HDD that fits the machine.?
Thank you

Log inor Register

to rate and post a comment

(195)
(47)
(4)

EROTOKRITOS SKENTOS

re: re: re: GE Logiq P5 Boot up problem

May 29, 2014 06:52

Dear Hipolito,i think that you can put any sata hdd as long as you have the software.Do you have it?

1 person liked this
Log inor Register

to rate and post a comment

(174)
(8)
(31)

Hipolito Jorge Iglesias

re: re: re: re: GE Logiq P5 Boot up problem

May 30, 2014 04:08

Dear Erotokritos,
i really do not have the Software neither licences available , are they necesary to reload the software?
thanks you

Log inor Register

to rate and post a comment

(195)
(47)
(4)

EROTOKRITOS SKENTOS

re: re: re: re: re: GE Logiq P5 Boot up problem

May 31, 2014 11:54

Yes you should now the software version and the license key you can obtain from GE.First check inside the P5 if the cd and license are there.

Log inor Register

to rate and post a comment

jaime cienfuegos

re: re: re: re: GE Logiq P5 Boot up problem

December 20, 2014 09:28

sorry ... I'd like to help me with the software of logip p5 .. emit weak signal translators .... thanks for the yuda

Log inor Register

to rate and post a comment

(51)
(15)

Kamran Butt

re: GE Logiq P5 Boot up problem

May 27, 2014 10:20

perform following checks
1) Go into bios and check whether Hard-disk is detected or not.
2) If hard disk is detected then try to re-install the Application Software.
3) If you are unable to install software then there is a possibility of damaged power supply.

Log inor Register

to rate and post a comment

(174)
(8)
(31)

Hipolito Jorge Iglesias

re: re: GE Logiq P5 Boot up problem

May 28, 2014 08:33

DEar Kamran Butt,
Thank you for your reply, i will check what you are suggesting
thank you again

1 person liked this
Log inor Register

to rate and post a comment

(230)
(35)
(4)

Rey Gonzalez

re: re: re: GE Logiq P5 Boot up problem

June 23, 2014 10:03

if you need any help contact me rey@allultrasoundservices.com

Log inor Register

to rate and post a comment

stats
DOTmed text ad

CC Medical : Ultrasound systems You Can Trust

CC Medical provides reliable ultrasound systems, probes, system parts, & technical support serving hospitals and healthcare providers domestically & internationally. Wholesale pricing available. 833-309-4229. Se Habla Espanol sales@ccmedicalhs.com

stats
advertisement

Upcoming Auction Events

Cbrx2sales
TIMED Ending Soon
Jun 05, 2026 (157 lots)