First of all you have to reinstall application software and positioner software.
If gantry loose the configuration again, or cannot load firmware parameters you have to replace the gantry CPU.
Be carefull you have to find a CPU with the same exactly Firmware and repeat the software installation procedure.
Email me if you want me to find you the correct part number for your CPU and firmware.
Hello. Battery on Gantry CPU was dead. It was replaced but there is no ping (192.168.1.40) on it. As I guess configuration was lost. How can I reconfigure it? (essential DS)
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Annas
GE Memography
February 26, 2024 01:27
Hi friends need help in GE memo gantry, gantry cpu lost its configuration. if anybody can help to reconfigure it or reprogramme it.
Kind Regards
to rate and post a comment
Carlos Pons
re: GE Memography
February 28, 2024 10:59
hello, what mammo is ? DS essential??
to rate and post a comment
Annas
re: re: GE Memography
February 29, 2024 09:55
Memo DS
to rate and post a comment
ALFATECH
re: GE Memography
March 04, 2024 10:39
First of all you have to reinstall application software and positioner software.
If gantry loose the configuration again, or cannot load firmware parameters you have to replace the gantry CPU.
Be carefull you have to find a CPU with the same exactly Firmware and repeat the software installation procedure.
Email me if you want me to find you the correct part number for your CPU and firmware.
to rate and post a comment
Giorgio66
re: re: GE Memography
May 03, 2024 10:26
Hello. Battery on Gantry CPU was dead. It was replaced but there is no ping (192.168.1.40) on it. As I guess configuration was lost. How can I reconfigure it? (essential DS)
to rate and post a comment