Dear Friends:
I have this situation with a General Electric MPH x-ray Generator.
It has lost all data in the RAM chip U20 since its interior battery is completely depleted.
The problem is not replacing the chip! that is the easy part. What I need is the procedure to put the information back into this U20 RAM.
I will appreciate it if someone can give me a hand on this.
You will need a couple of items - the most critical being the system software that comes on 3 1/2" floppies. You then connect up your laptop using a service cable (null modem) and follow the procedures in the MPH Installation Manual.
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
Manuel Brugat
GE MPH Generator RAM re-program Procedure
July 27, 2020 10:31
Dear Friends:
I have this situation with a General Electric MPH x-ray Generator.
It has lost all data in the RAM chip U20 since its interior battery is completely depleted.
The problem is not replacing the chip! that is the easy part. What I need is the procedure to put the information back into this U20 RAM.
I will appreciate it if someone can give me a hand on this.
Sincerely:
Manuel (Manny) Brugat/Image Instrumentation, Inc.
to rate and post a comment
Rupert Theroue
re: GE MPH Generator RAM re-program Procedure
August 25, 2020 10:56
You will need a couple of items - the most critical being the system software that comes on 3 1/2" floppies. You then connect up your laptop using a service cable (null modem) and follow the procedures in the MPH Installation Manual.
to rate and post a comment