Please,We have a GE Profile 3 MRI that developed a computer fault.
We shipped it out to a Facility in Turkey for repairs.
The facility just informed us that the problem is a bad NVRAM.
They indicated that they have no means of transferring the data on our bad NVRAM to a good one.
They advised we go for a complete Profile 3 computer or upgrade the system to Profile 4 or Excite.
Kindly assist Please. System has been down for two years now!!!
Hello friend I am miguel from peru. I have a problem with signa profile III. Error message: RF amplifier is in standby state error: 2239862 RF amplifier is in standby state error: 2239862
Could you help me, please? My cellphone is: +51 986729629
Hi , Thomas,s
This is very Simple problem. I have solved this problem many times.If you have a pic of monitor with problem then please send me on my email. cheemat@yahoo.com.
I will send you NVRAM and the set of instructions to set all parameters of your system.
Regard
Hello friend I am miguel from peru. I have a problem with signa profile III. Error message: RF amplifier is in standby state error: 2239862 RF amplifier is in standby state error: 2239862
Could you help me, please? My cellphone is: +51 986729629
If u have old NVRAM then Pls send me the pic of the yellow sticker on that I will send u the instructions to run ur system also I will send u new NVRAM. My Email is Cheemat@yahoo.com Pls identify ur location.
Hello friend I am miguel from peru. I have a problem with signa profile III. Error message: RF amplifier is in standby state error: 2239862 RF amplifier is in standby state error: 2239862
Could you help me, please? My cellphone is: +51 986729629
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Thomas Onyema
GE PROFILE III MRI COMPUTER PROBLEM
April 30, 2014 08:36
Please,We have a GE Profile 3 MRI that developed a computer fault.
We shipped it out to a Facility in Turkey for repairs.
The facility just informed us that the problem is a bad NVRAM.
They indicated that they have no means of transferring the data on our bad NVRAM to a good one.
They advised we go for a complete Profile 3 computer or upgrade the system to Profile 4 or Excite.
Kindly assist Please. System has been down for two years now!!!
to rate and post a comment
mahmoud abdelhaddy
re: GE PROFILE III MRI COMPUTER PROBLEM
May 01, 2014 08:50
Please contact me on en.mahmoud.abdelhady@gmail.com I have all solution to your problem
to rate and post a comment
Ignacio Garcia
re: GE PROFILE III MRI COMPUTER PROBLEM
May 02, 2014 08:30
I have information for you, what is your email for contact you.
to rate and post a comment
MIGUEL ANGEL TORRES MARTINEZ
re:re: GE PROFILE III MRI COMPUTER PROBLEM
September 02, 2016 10:38
Hello friend
I am miguel from peru.
I have a problem with signa profile III.
Error message:
RF amplifier is in standby state error: 2239862
RF amplifier is in standby state error: 2239862
Could you help me, please?
My cellphone is: +51 986729629
to rate and post a comment
Cheema
re: GE PROFILE III MRI COMPUTER PROBLEM
May 06, 2014 11:51
Hi , Thomas,s
This is very Simple problem. I have solved this problem many times.If you have a pic of monitor with problem then please send me on my email. cheemat@yahoo.com.
I will send you NVRAM and the set of instructions to set all parameters of your system.
Regard
to rate and post a comment
Joe Valdez
re: GE PROFILE III MRI COMPUTER PROBLEM
July 13, 2014 12:33
Contact ME We can help mriservice@yandex.com
to rate and post a comment
MIGUEL ANGEL TORRES MARTINEZ
re:re: GE PROFILE III MRI COMPUTER PROBLEM
September 02, 2016 10:38
Hello friend
I am miguel from peru.
I have a problem with signa profile III.
Error message:
RF amplifier is in standby state error: 2239862
RF amplifier is in standby state error: 2239862
Could you help me, please?
My cellphone is: +51 986729629
to rate and post a comment
Cheema
re: GE PROFILE III MRI COMPUTER PROBLEM
July 14, 2014 08:31
If u have old NVRAM then Pls send me the pic of the yellow sticker on that I will send u the instructions to run ur system also I will send u new NVRAM. My Email is Cheemat@yahoo.com Pls identify ur location.
to rate and post a comment
MIGUEL ANGEL TORRES MARTINEZ
re:GE PROFILE III MRI COMPUTER PROBLEM
September 02, 2016 10:38
Hello friend
I am miguel from peru.
I have a problem with signa profile III.
Error message:
RF amplifier is in standby state error: 2239862
RF amplifier is in standby state error: 2239862
Could you help me, please?
My cellphone is: +51 986729629
to rate and post a comment