im having a problem with a ge signa profile mri 0.2t.
every time i run warm up scan,it fails and the message appear "TG too high.Possible algorithm failure in APS1. Auto prescan failed. Try again or use manual scan."
Hi,
I have highly-experienced engineers who should be able to get this problem resoloved for you. Please contact me at SLNetMed@gmail.com at your earliest convenience and we will see what we can do.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
john dismaya
ge profile TG problem
July 22, 2011 09:30
hi all!
im having a problem with a ge signa profile mri 0.2t.
every time i run warm up scan,it fails and the message appear "TG too high.Possible algorithm failure in APS1. Auto prescan failed. Try again or use manual scan."
any comment or suggestion is appreciated.
to rate and post a comment
Shawn Lincoln
Re: ge profile TG problem
July 22, 2011 10:12
Hi,
I have highly-experienced engineers who should be able to get this problem resoloved for you. Please contact me at SLNetMed@gmail.com at your earliest convenience and we will see what we can do.
to rate and post a comment
Nirvikar Yadav
Re: ge profile TG problem
July 24, 2011 08:05
Wat happens if you try manual prescan. HOw are the results on manual prescan and scanning ?
to rate and post a comment
Gary Benitez
re: Re: ge profile TG problem
March 27, 2014 01:04
Hi Nirvikar,
Can you get the GE Signa Profil II Open MRI service manual?
to rate and post a comment
saju
re: ge profile TG problem
March 27, 2014 07:51
Please check the r1 r2 values in manual scan . And tg . In sajubhas@gmail.com . We can help u to fix this problem
to rate and post a comment
Momo Gu
re: re: ge profile TG problem
August 18, 2023 11:41
please can you help me about scan fail and RF not ready
to rate and post a comment
Gustavo Sierra
re: ge profile TG problem
April 17, 2014 01:14
Hi, i have the same problem ! can you fix ?
We would greatly appreciate if you can help me.
thanks
to rate and post a comment
Gustavo Sierra
re: ge profile TG problem
June 04, 2014 05:37
hi john, could you solved the problem ?
i still have the same problem.
greetings.
to rate and post a comment
tibebu solomon
re: ge profile TG problem
June 24, 2014 07:55
hi john i have the same problem that you faced i hope you can help me to solve the problem pls
to rate and post a comment
MRIconcept
re: ge profile TG problem
January 30, 2017 10:37
Dear Sir How you solved your problem ? I am also facing the same.
to rate and post a comment
MJ
re: re: ge profile TG problem
March 25, 2025 09:58
why I cannot get a frequency in a profile 3 after not powering for a longtime?
to rate and post a comment