Startup problems, after replacement of NVRAM
The factory settings were loaded, but I do not have the memory size configuration data. I need the address to correct to define ram size for cpu MVME167. now shows 0x4000000 and need define 0x2000000 BSP
North America's trusted source for ultrasound probe repair and certified refurbished OEM probes. Free evaluations, 1-year warranty, fast turnaround for GE, Philips, Sonosite, Canon, Toshiba, and more. Call (224) 265-7640 / Sales@Lenard.Healthcare
hiortsam dade
GE SYSTEM FIVE BOOT PROBLEM
February 03, 2017 10:04
My GE System Five would not boot. After connecting hyperterminal to the system, I found out that it hangs at this place:
CreatingUVpipes...
UVpipescreated
RFT_RPC::loadprogram()
FEC_RPC::loadprogram()
This is my settings:
bootdevice :scsi=0,0
unitnumber :0
processornumber :0
filename :/hd0/vxWorks
inetonethernet(e):3.222.21.232:fffffc00
user(u) :s5_rack
flags(f) :0x8
targetname(tn) :wind8
startupscript(s) :etc/init
other(o) :ei
Has any one any help or experience regarding this?
Thank you
to rate and post a comment
juan pablo amado
re: GE SYSTEM FIVE BOOT PROBLEM
May 08, 2018 03:16
Startup problems, after replacement of NVRAM
The factory settings were loaded, but I do not have the memory size configuration data. I need the address to correct to define ram size for cpu MVME167. now shows 0x4000000 and need define 0x2000000 BSP
to rate and post a comment