I can not boot the system from the first start. When I loading an operating system shows error and begins a cyclic restart. I can not read error message because it disappears very quickly. When I start download rebooting CD I see the DOS-picture and keyboard not working. Some time before system write about kernell32.dll error. What's the problem? Thank you.
re: Re: GE Voluson 730 Expert - system does not boot
September 23, 2019 09:27
Greetings from Greece , i need your help about my US Voluson . When it is booting the us machine stops to the screen GE-MED Tv0.03 . Any idea ? Thank you in advance .
re: Re: GE Voluson 730 Expert - system does not boot
July 05, 2017 08:08
My machine voluson 730 pro hard disk failure. I replaced a Hitachi 160Gb drive. But I'm having trouble creating a NewDisk.
"patition creation failed"
Help me please..
re: Re: GE Voluson 730 Expert - system does not boot
December 12, 2013 07:31
Hi Rossana. I have a Ge Vouluson 730 Expert BTO8 that the monitor is not receiving signal from the system, and only this appears on the screen: AGING!!!!
CHECK SIGNAL.
GREAT SUCESS.
VER LOWOO. MO608K.
This system does not boot.
re: Re: GE Voluson 730 Expert - system does not boot
December 12, 2013 07:31
Hi Carlos. I have a Ge Vouluson 730 Expert BTO8 that the monitor is not receiving signal from the system, and only this appears on the screen: AGING!!!!
CHECK SIGNAL.
GREAT SUCESS.
VER LOWOO. MO608K.
This system does not boot.
re: re: Re: GE Voluson 730 Expert - system does not boot
December 13, 2013 08:05
Dear
You can check CPU board, CPP board. First, you measure out put of CPP board ( 12V, 5V, 3.3v....) if it OK you must check CPU board.To check CPU board, first you can unplug RAM and turn on machine, if have beep sound, CPU board is OK, sometime clean RAM and reinstall it OK, if not OK you must change RAM. If unplug RAM and not have sound, CPU board may fail you must repair CPU board.
Good luck
re: Re: GE Voluson 730 Expert - system does not boot
June 30, 2014 10:54
Hello Carlos i had the similar problem but my HDD was to be replaced ,i replaced the HDD then I followed the installation procedures and installation was completed with success but the machine has detected some device that requires drivers as:
Kretz 9054 PCI board
Ethernet
PCI Device
audio
Video
displaying the echo is really weird as if there is no appropriate drivers. My question is how can I find and install
re: Re: GE Voluson 730 Expert - system does not boot
May 01, 2023 11:44
Good day sir I need help on how to fix voluson 730 expert the screen touch is not working and when the system is boot it show connect console and ocp not connected please what can I do to get it fix sir
if you can istal the cd and you can finish it the system is ok.
or you can install the cd ...
1-if your boot cd is load ad you can see the bolu page for select your boot and cd ram is ok
2- if the sytem hangup or cd is defect or ram have problem or your cd is not croct bto.
i have this 2 videos if you need to reload the system with a service disk:
http://youtu.be/nhPA4n8gxHY
thi its to boot with a usb-optical device, and this other link its to reload C from R:
http://www.youtube.com/watch?v=VvmLiN1zj3Y
re: re: re: re: re: GE Voluson 730 Expert - system does not boot
May 31, 2016 10:23
i have this 2 videos if you need to reload the system with a service disk:
http://youtu.be/nhPA4n8gxHY
thi its to boot with a usb-optical device, and this other link its to reload C from R:
http://www.youtube.com/watch?v=VvmLiN1zj3Y
re: re: re: re: re: re: GE Voluson 730 Expert - system does not boot
August 25, 2020 10:56
Hi, I have a voluson with older or different Linux version that doesn't gives the GE-Service, mem test options at start do you know how to access recovery from that one?
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Ilya Zhukov
GE Voluson 730 Expert - system does not boot
May 21, 2010 09:48
I can not boot the system from the first start. When I loading an operating system shows error and begins a cyclic restart. I can not read error message because it disappears very quickly. When I start download rebooting CD I see the DOS-picture and keyboard not working. Some time before system write about kernell32.dll error. What's the problem? Thank you.
to rate and post a comment
Andrew Gomez
Re: GE Voluson 730 Expert - system does not boot
May 24, 2010 12:54
CPU or Hard drive problem, replace hard Drive first then CPU.
to rate and post a comment
Tuy Do Duy
Re: GE Voluson 730 Expert - system does not boot
June 26, 2010 11:25
Firs, I think you should reinstall software. If it not work you can check RAM and Hardisk
to rate and post a comment
JUAN GARCIA
re: Re: GE Voluson 730 Expert - system does not boot
November 16, 2014 11:13
I need cd software for Voluson 730 exp (image .iso) please. Give me a link to download: (sorry, my English is minimal.)
to rate and post a comment
Manolo Ruano
re: re: Re: GE Voluson 730 Expert - system does not boot
April 20, 2015 12:08
can you fix your Voluson?? because i have a image
to rate and post a comment
Andrick Kee
re: re: re: Re: GE Voluson 730 Expert - system does not boot
September 20, 2017 03:06
Hi manolo i need the voluson expert 730 bt04 service disk. can you help me?
to rate and post a comment
Andrick Kee
re: re: re: Re: GE Voluson 730 Expert - system does not boot
September 20, 2017 03:07
Manolo Ruano Hi i need the Voluson Expert bt04 software can you help me?
to rate and post a comment
Eric Bem
re: re: re: Re: GE Voluson 730 Expert - system does not boot
May 01, 2023 11:44
Please sir I need the image too my own is bt05
to rate and post a comment
MAGALHAES THIAGO TORRES
re: Re: GE Voluson 730 Expert - system does not boot
May 25, 2015 11:42
Good precise day of iso V730 with touche scren thiago.artes@gmail.com
to rate and post a comment
Andrick Kee
re: re: Re: GE Voluson 730 Expert - system does not boot
September 20, 2017 03:06
hi do ypu have the voluson expert bt04 drivers?
to rate and post a comment
Apostolos Byros
re: Re: GE Voluson 730 Expert - system does not boot
September 23, 2019 09:27
Greetings from Greece , i need your help about my US Voluson . When it is booting the us machine stops to the screen GE-MED Tv0.03 . Any idea ? Thank you in advance .
to rate and post a comment
Thomas Garbler
Re: GE Voluson 730 Expert - system does not boot
May 25, 2010 11:25
I think the problem is rather with RAM or the dusty CD-drive you're using to boot instead of CPU.
to rate and post a comment
Ilya Zhukov
Re: GE Voluson 730 Expert - system does not boot
May 26, 2010 08:50
I downloaded the system in Safe Mode, then managed to run a boot disk. System still works. May be reinstall Win2K? But I don't know service password.
to rate and post a comment
Thomas Garbler
Re: GE Voluson 730 Expert - system does not boot
May 31, 2010 11:17
Voluson 730 I saw had several partitions (not only Win2k but Unix one and some special). Be carefull and don't wipe them occasionally.
Anyway it won't hurt if You will make a sector-by-sector copy of hard-drive onto another disk before tweaking the original.
to rate and post a comment
Mạnh Hùng
re: Re: GE Voluson 730 Expert - system does not boot
July 05, 2017 08:08
My machine voluson 730 pro hard disk failure. I replaced a Hitachi 160Gb drive. But I'm having trouble creating a NewDisk.
"patition creation failed"
Help me please..
to rate and post a comment
Murat Canpolat
re: re: Re: GE Voluson 730 Expert - system does not boot
September 22, 2017 04:18
Connect dvd room to mainboard with ide cable (not usb) and reinstall sw.
muratcanpolat@hotmail.com.tr
to rate and post a comment
Taylor Leo
re: Re: GE Voluson 730 Expert - system does not boot
January 09, 2014 01:43
You need a USB "dongle" to get full access to service mode. It is very difficult to obtain.
to rate and post a comment
rossana diaz
Re: GE Voluson 730 Expert - system does not boot
September 17, 2010 07:56
the password for voluson is SHE IS capital letters
to rate and post a comment
Ilya Zhukov
Re: GE Voluson 730 Expert - system does not boot
September 18, 2010 11:05
Thank you
to rate and post a comment
Victor Patrick
re: Re: GE Voluson 730 Expert - system does not boot
December 12, 2013 07:31
Hi Rossana. I have a Ge Vouluson 730 Expert BTO8 that the monitor is not receiving signal from the system, and only this appears on the screen: AGING!!!!
CHECK SIGNAL.
GREAT SUCESS.
VER LOWOO. MO608K.
This system does not boot.
Please give me some hint to resolve this problem.
Sincerely,
Victor Rincon
Dallas, Tx
e-mail: sonodx@gmail.com
to rate and post a comment
carlos mendez
Re: GE Voluson 730 Expert - system does not boot
November 10, 2011 08:18
Reinstall the software with the service Disk
to rate and post a comment
Arbjan Rusi
Re: GE Voluson 730 Expert - system does not boot
November 11, 2011 10:10
Can you give me the installation cd?
arbjanrusi@gmail.com
Arbjan
to rate and post a comment
Victor Patrick
re: Re: GE Voluson 730 Expert - system does not boot
December 12, 2013 07:31
Hi Carlos. I have a Ge Vouluson 730 Expert BTO8 that the monitor is not receiving signal from the system, and only this appears on the screen: AGING!!!!
CHECK SIGNAL.
GREAT SUCESS.
VER LOWOO. MO608K.
This system does not boot.
Please give me some hint to resolve this problem.
Sincerely,
Victor Rincon
Dallas, Tx
e-mail: sonodx@gmail.com
to rate and post a comment
Tuy Do Duy
re: re: Re: GE Voluson 730 Expert - system does not boot
December 13, 2013 08:05
Dear
You can check CPU board, CPP board. First, you measure out put of CPP board ( 12V, 5V, 3.3v....) if it OK you must check CPU board.To check CPU board, first you can unplug RAM and turn on machine, if have beep sound, CPU board is OK, sometime clean RAM and reinstall it OK, if not OK you must change RAM. If unplug RAM and not have sound, CPU board may fail you must repair CPU board.
Good luck
to rate and post a comment
Victor Patrick
re: re: re: Re: GE Voluson 730 Expert - system does not boot
December 13, 2013 06:03
Thank you very much Tuy.
I greatly appreciate your prompt
response.
Victor R
to rate and post a comment
KIMITSI KILIBATAKAKA
re: Re: GE Voluson 730 Expert - system does not boot
June 30, 2014 10:54
Hello Carlos i had the similar problem but my HDD was to be replaced ,i replaced the HDD then I followed the installation procedures and installation was completed with success but the machine has detected some device that requires drivers as:
Kretz 9054 PCI board
Ethernet
PCI Device
audio
Video
displaying the echo is really weird as if there is no appropriate drivers. My question is how can I find and install
to rate and post a comment
MAGALHAES THIAGO TORRES
re: Re: GE Voluson 730 Expert - system does not boot
March 07, 2018 09:07
Thiago.artes@gmail.com
to rate and post a comment
Eric Bem
re: Re: GE Voluson 730 Expert - system does not boot
May 01, 2023 11:44
Good day sir I need help on how to fix voluson 730 expert the screen touch is not working and when the system is boot it show connect console and ocp not connected please what can I do to get it fix sir
to rate and post a comment
morteza yousefi
re: GE Voluson 730 Expert - system does not boot
August 30, 2012 08:54
if you can istal the cd and you can finish it the system is ok.
or you can install the cd ...
1-if your boot cd is load ad you can see the bolu page for select your boot and cd ram is ok
2- if the sytem hangup or cd is defect or ram have problem or your cd is not croct bto.
to rate and post a comment
carlos mendez
re: GE Voluson 730 Expert - system does not boot
July 24, 2013 08:49
i have this 2 videos if you need to reload the system with a service disk:
http://youtu.be/nhPA4n8gxHY
thi its to boot with a usb-optical device, and this other link its to reload C from R:
http://www.youtube.com/watch?v=VvmLiN1zj3Y
to rate and post a comment
thuan tran
re: GE Voluson 730 Expert - system does not boot
July 25, 2013 10:00
It mean that in operation system missing the file Kernell.dll , To Copy it to operation system , it s ok
to rate and post a comment
M.Y
re: re: GE Voluson 730 Expert - system does not boot
July 26, 2013 06:40
how I can copy kernell.dll
to rate and post a comment
JUAN GARCIA
re: GE Voluson 730 Expert - system does not boot
November 16, 2014 11:13
I need cd software for Voluson 730 exp (image .iso) please. Give me a link to download: (sorry, my English is minimal.)
to rate and post a comment
Manolo Ruano
re: re: GE Voluson 730 Expert - system does not boot
January 08, 2015 03:59
If you need HD Image send me email
to rate and post a comment
Zakhar Tkachenko
re: re: re: GE Voluson 730 Expert - system does not boot
April 20, 2015 12:08
Please, send me HD image. zaharjam@gmail.com
to rate and post a comment
MAGALHAES THIAGO TORRES
re: re: re: re: GE Voluson 730 Expert - system does not boot
May 25, 2015 11:42
Good precise day of iso V730 with touche scren thiago.artes@gmail.com
to rate and post a comment
Jaime IASS
re: re: re: re: GE Voluson 730 Expert - system does not boot
November 20, 2015 07:49
Please, send me HD image: jfarfan_campos@Hotmail.com
to rate and post a comment
Ahmad Ajouz
re: re: re: GE Voluson 730 Expert - system does not boot
March 15, 2016 06:04
hi
i need to software BTo1
ah.ajouz@gmail.com
to rate and post a comment
Melany Sviato
re: re: re: re: GE Voluson 730 Expert - system does not boot
May 30, 2016 10:35
hello, i can help with software
to rate and post a comment
carlos mendez
re: re: re: re: re: GE Voluson 730 Expert - system does not boot
May 31, 2016 10:23
i have this 2 videos if you need to reload the system with a service disk:
http://youtu.be/nhPA4n8gxHY
thi its to boot with a usb-optical device, and this other link its to reload C from R:
http://www.youtube.com/watch?v=VvmLiN1zj3Y
to rate and post a comment
LR300
re: re: re: re: re: re: GE Voluson 730 Expert - system does not boot
August 25, 2020 10:56
Hi, I have a voluson with older or different Linux version that doesn't gives the GE-Service, mem test options at start do you know how to access recovery from that one?
to rate and post a comment
hernan hernansam
re: re: re: re: re: GE Voluson 730 Expert - system does not boot
March 02, 2018 09:33
hello , please I need the recovery software
hernansam@gmail.com
to rate and post a comment
hernan hernansam
re: re: GE Voluson 730 Expert - system does not boot
March 02, 2018 09:33
please I need the recovery software
hernansam@gmil.com
to rate and post a comment
Jaquelin Terrones
re: re: re: GE Voluson 730 Expert - system does not boot
March 07, 2018 04:50
hello i have a hdd with software loaded on sale. jadashbiomedco@aol.com
to rate and post a comment
luis molina
re: GE Voluson 730 Expert - system does not boot
May 19, 2016 10:24
I need cd software for Voluson 730 exp (image .iso) please. Give me a link to download
lalodbs@hotmail.com
to rate and post a comment
carlos mendez
re: re: GE Voluson 730 Expert - system does not boot
May 31, 2016 10:23
i have it send me an email to calitosmendez@hotmail.com
to rate and post a comment
Juliana Moren
re: GE Voluson 730 Expert - system does not boot
September 23, 2019 09:29
Anyone can help me with the drivers and the instruction on how to reinstall the software !!??
to rate and post a comment
rafael castillo
re: GE Voluson 730 Expert - system does not boot
October 28, 2020 11:50
go to RESCUE PARTITION beginin to restore the sistem in option GE SERVICE donwload the pdf manual and your be find how my friend greetings
to rate and post a comment