Dear everybody,
I had connect wrong the wire to little keyboard.
Then it can run good when change date .But when self checking at 64%,
a error show that:
[error]. No measure calculation package setting in probe 0:
0 application :0
Is it a hard driver error?
How to repair it?
Thanks
I wish I could help you with your problem. The reason for my post is that I am in desperate need of a HDI 4000 manual. If I could get a copy emailed to me you would really make my day. Hope that you get your issue fixed and have a great day. My email address is jbenson62@gmail.com
Tried to log in Cmos again, need to hold the Del button while the system is booting. If you can not fix it problem with changing date and time, i think this problem come from the software.
Altima will inspire the trust, loyalty and commitment of our customers through positive relationships and collaboration, top quality equipment services, and a clearly superior value proposition. Call Today (469) 644-7063
XEI PING
HDI4000 error
December 25, 2012 09:35
I've a HDI4000,when power on,system show:
CMOS checksum errors--defaults loaed
I changed a new battery,but not change.
Anybody can help me?
Thanks.
to rate and post a comment
XEI PING
re: HDI4000 error
December 26, 2012 12:19
Error showed after memory，CPU，harddriver，CD-RW selfcheck end.
to rate and post a comment
XEI PING
re: re: HDI4000 error
April 12, 2013 09:47
Dear everybody,
I had connect wrong the wire to little keyboard.
Then it can run good when change date .But when self checking at 64%,
a error show that:
[error]. No measure calculation package setting in probe 0:
0 application :0
Is it a hard driver error?
How to repair it?
Thanks
to rate and post a comment
Volodymyr Markevych
re: HDI4000 error
December 26, 2012 05:56
Go to bios setup by pressing "del" and update the date/clock. Save it and exit.
to rate and post a comment
XEI PING
re: re: HDI4000 error
December 27, 2012 10:13
Pressing Del when power on,but no answer.
F1 no responded ,too.
to rate and post a comment
Jon Benson
re: re: re: HDI4000 error
December 27, 2012 03:17
I wish I could help you with your problem. The reason for my post is that I am in desperate need of a HDI 4000 manual. If I could get a copy emailed to me you would really make my day. Hope that you get your issue fixed and have a great day. My email address is jbenson62@gmail.com
to rate and post a comment
P402
re: re: re: re: HDI4000 error
December 28, 2012 09:55
HI Xei PIng
Tried to log in Cmos again, need to hold the Del button while the system is booting. If you can not fix it problem with changing date and time, i think this problem come from the software.
Thanks,
to rate and post a comment