I need help with my problem in the installation of the mammo unit.
After booting up the AWS and inputting the username and password, there is a display that says: "Invalid software key for AWS Station?" What does this mean?
Application AWS is protect by software key if you don't this Key application don't open .
Normally with documentation there is one USB KEY insite there is write software key.
If you dont find software key SYSTEM don't working
There is a mismatch between your HOSTID and the software key.
If you have just re-installed the system software from scratch, you need to install the key:
Open a command window and type 'install.key'....then press enter/return
Then look at the label on the left rear corner of the SUN workstation top cover and copy your system's key...please ensure you enter it in the system just the way you see it.
Then restart your browser....
If this error appeared abruptly and you have not reinstalled software:
Make sure that the HOSTID & MAC ADDRESS displayed on the screen when the system is booting are correct. You can crosscheck with the HOSTID from the same label on the SUN workstation cover.
If they have changed, you will need to reset the IDPROM values using .mkp command.
Please contact me via WhatsApp +256782702243 for further instructions.
Hello Aris. The software key is an alphanumeric code. If you don't have it, you must ask to the person who sold the system for this. If you can't find the software key, please send me an email to: guery.diaz@maxialatam.com
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Aris
Help with GE Senograph 2000D
April 03, 2019 10:25
Hi guys,
I need help with my problem in the installation of the mammo unit.
After booting up the AWS and inputting the username and password, there is a display that says: "Invalid software key for AWS Station?" What does this mean?
to rate and post a comment
Francesco Didonato
re: Help with GE Senograph 2000D
April 04, 2019 09:46
Application AWS is protect by software key if you don't this Key application don't open .
Normally with documentation there is one USB KEY insite there is write software key.
If you dont find software key SYSTEM don't working
to rate and post a comment
CRAIG WAMBURA
re: Help with GE Senograph 2000D
April 04, 2019 09:47
There is a mismatch between your HOSTID and the software key.
If you have just re-installed the system software from scratch, you need to install the key:
Open a command window and type 'install.key'....then press enter/return
Then look at the label on the left rear corner of the SUN workstation top cover and copy your system's key...please ensure you enter it in the system just the way you see it.
Then restart your browser....
If this error appeared abruptly and you have not reinstalled software:
Make sure that the HOSTID & MAC ADDRESS displayed on the screen when the system is booting are correct. You can crosscheck with the HOSTID from the same label on the SUN workstation cover.
If they have changed, you will need to reset the IDPROM values using .mkp command.
Please contact me via WhatsApp +256782702243 for further instructions.
to rate and post a comment
VENGE
re: Help with GE Senograph 2000D
April 04, 2019 09:56
Hello Aris. The software key is an alphanumeric code. If you don't have it, you must ask to the person who sold the system for this. If you can't find the software key, please send me an email to: guery.diaz@maxialatam.com
to rate and post a comment