Hello,
I need to configure the NVRAM in a Sunblade 150 computer (UltraSPARC IIe,550 MHz), OpenBoot 4.17.1
I was using the commands mkp and mkpl but the system do not recognize these commands.
Thank you in advance,
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
J. Mario Hernandez
Help with Senographe 2000D
August 17, 2017 04:51
Hello,
I need to configure the NVRAM in a Sunblade 150 computer (UltraSPARC IIe,550 MHz), OpenBoot 4.17.1
I was using the commands mkp and mkpl but the system do not recognize these commands.
Thank you in advance,
to rate and post a comment
Francesco Didonato
re: Help with Senographe 2000D
August 18, 2017 10:25
Hello normally command is nvram
to rate and post a comment
Manuel Brugat
re: Help with Senographe 2000D
March 04, 2019 10:31
program the NVRAM in a sun ultra 10 and then plug it in the sunblade 150. I have done this successfully.
to rate and post a comment