Problems with right side controls does not response.
LCD works fine and also right side controls are ok.
Any idea about cause of this problem? (I already check cable connections)
It's probably the right-side PCB assembly. You'll probably have to replace it. And if it's not the board, then it's the wiring harness between the board and the Junction Box. But have you gotten into the Service Mode of the TotalCare to verify the problem?
One call to 440-263-6575 and your move will be covered.
We repair & store trailers. We build to your custom needs.
JDI Mobile Medical Manufacturing. Inc. We have your back.
Manuel Esquer
Hill-Rom P1900 controls problem
October 11, 2021 10:33
Problems with right side controls does not response.
LCD works fine and also right side controls are ok.
Any idea about cause of this problem? (I already check cable connections)
to rate and post a comment
Ray Brown
re: Hill-Rom P1900 controls problem
October 12, 2021 10:05
It's probably the right-side PCB assembly. You'll probably have to replace it. And if it's not the board, then it's the wiring harness between the board and the Junction Box. But have you gotten into the Service Mode of the TotalCare to verify the problem?
to rate and post a comment