Hi dear.
I have some problem about Hitachi Supria 16. So that we saw two error.
1. An abnormality occurred in the X-ray Generator. Please retry. Error code: 0002D800 (X D8)
2. The number of arcing recoveries has been exceeded. Please retry. Error code: 00022000 (X 20)
Could you please help me to solve this problem.
Hitachi CT-32 Supria have error Code: 00029300 (X 93) if you can help me to gate service manual to solve this problem so that I can repair the device
If you can provide me the service manual for the device, I will be grateful for your cooperationIf, please help Sir,
Cavid Muradli
Hitachi CT
August 19, 2020 10:37
Hi dear.
I have some problem about Hitachi Supria 16. So that we saw two error.
1. An abnormality occurred in the X-ray Generator. Please retry. Error code: 0002D800 (X D8)
2. The number of arcing recoveries has been exceeded. Please retry. Error code: 00022000 (X 20)
Could you please help me to solve this problem.
to rate and post a comment
Tolga GULUMSER
re: Hitachi CT
August 20, 2020 11:03
What is the slice count of x-ray tube? If it is high, then first suspicious xray tube. And check the hv generator and cables.
to rate and post a comment
turfa jhjah
re: re: Hitachi CT
October 31, 2023 10:37
I have same problem
to rate and post a comment
Root
re: Hitachi CT
August 20, 2020 11:05
1 - X D8 means that : Moniteur Communication error in the inverter unit
2 - X 20 : Arcing recovery counts over
to rate and post a comment
Mr.CT.service
re: re: Hitachi CT
February 16, 2022 10:55
Hi,
May you share manual for re-install/adjust X-Ray tube Varex of Hitachi Supra 16?
Best regards
to rate and post a comment
Waleed Ahmed
re: re: Hitachi CT
October 31, 2022 09:36
Hello Sir,
Hitachi CT-32 Supria have error Code: 00029300 (X 93) if you can help me to gate service manual to solve this problem so that I can repair the device
If you can provide me the service manual for the device, I will be grateful for your cooperationIf, please help Sir,
to rate and post a comment
Tchouto donatien
re: Hitachi CT
February 21, 2024 10:55
change the tube
to rate and post a comment