Hola, Hi
Please Contact me directly, I will help you.
Wheel have a sensor to sincronice rotation to 60HZ, and HV cicle to , each cicle in echa part of 6 material on wheel area.
Check CN6 sensor and please I need help to. Cable fron this sensor was damage then I need picture fron CN6 to fix cable (3 wire present) 4 position on conector. I have pictures.
I have service manual in pdf ready to send you.
Best Regard
Jose Chao
I have same problem now and I need a all filter system schematics or service manual, and I have a question to you? Do you know this sensor is magnetic, inductive, capasitif, Electrical conductive sensor which one? I know it is difficult, from the sensor number. Please send me service manual to my e-mail. fysares@hotmail.com
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Ronnie Aguiar
Hologic QDR 4000 problem
July 16, 2008 06:46
please, error
- not detecting chopper pickoff,check that motor is on-
please help-me
ronnie aguiar
to rate and post a comment
Daniel Tread
Re: Hologic QDR 4000 problem
July 18, 2008 11:38
Check if the filter wheel is rotating,if not check belt and motor, if it is you need to replace the filter pick-off assm.
to rate and post a comment
Ronnie Aguiar
Re: Hologic QDR 4000 problem
July 21, 2008 02:13
the filter in this rotation, help please
to rate and post a comment
jose chao
Re: Hologic QDR 4000 problem
September 29, 2009 07:27
Hola, Hi
Please Contact me directly, I will help you.
Wheel have a sensor to sincronice rotation to 60HZ, and HV cicle to , each cicle in echa part of 6 material on wheel area.
Check CN6 sensor and please I need help to. Cable fron this sensor was damage then I need picture fron CN6 to fix cable (3 wire present) 4 position on conector. I have pictures.
I have service manual in pdf ready to send you.
Best Regard
Jose Chao
to rate and post a comment
Fysares Delali
Re: Hologic QDR 4000 problem
December 24, 2009 12:34
Hi Jose
I have same problem now and I need a all filter system schematics or service manual, and I have a question to you? Do you know this sensor is magnetic, inductive, capasitif, Electrical conductive sensor which one? I know it is difficult, from the sensor number. Please send me service manual to my e-mail. fysares@hotmail.com
Thank you for your help...
to rate and post a comment
gustavo fiochi
Re: Hologic QDR 4000 problem
April 08, 2010 04:22
Dear Sir, i understand you have tech information of Hologic. i `m needing schematics for a 2000 i´m having problems with thechopper pickoff
to rate and post a comment
Z S Jadoon
re: Re: Hologic QDR 4000 problem
August 08, 2012 11:03
Hi Sir, We need service manual/schematics of QDR4000. Please send us. We can pay you the charges if any. Thanks.
to rate and post a comment