Hello everybody... Good Day!
Ive been working with the BS16 with recon error.
during boot up, the system will give a recon error and the reconstruction will shutdown.
IG1 is jarrell
IG2 is jarrell
IG3 is westville
try run racdiags command.
the IG1 and IG2 has a response with directories but the IG3 has a message "/dev/gemsrac no such file or directory".
try to ping IG3 = it replies
try to rsh IG3 = it will go without error
try telnet 623 to IG3 = it will go without error
the darc can power on/off the IG3.
put monitor on IG3, it completely booted.
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
John7475
IG problem for Brightspeed16
February 22, 2016 09:50
Hello everybody... Good Day!
Ive been working with the BS16 with recon error.
during boot up, the system will give a recon error and the reconstruction will shutdown.
IG1 is jarrell
IG2 is jarrell
IG3 is westville
try run racdiags command.
the IG1 and IG2 has a response with directories but the IG3 has a message "/dev/gemsrac no such file or directory".
try to ping IG3 = it replies
try to rsh IG3 = it will go without error
try telnet 623 to IG3 = it will go without error
the darc can power on/off the IG3.
put monitor on IG3, it completely booted.
any help will appreciated..
thank you
John D..
to rate and post a comment
Dmitry Dederer
re: IG problem for Brightspeed16
February 23, 2016 09:07
Hello! Check the HDD and the RAID of the IG's. If you can loose the RAW data, just recreate the RAID RAW massive
to rate and post a comment
John7475
re: re: IG problem for Brightspeed16
February 24, 2016 09:33
hello Demitry..
this IG has no HDD
thanks..
to rate and post a comment
randy oswalt
re: IG problem for Brightspeed16
February 23, 2016 09:07
Possible corruption in ques. clear recon queue's. Shutdown apps. As su run consoleDiags
to rate and post a comment
randy oswalt
re: re: IG problem for Brightspeed16
February 23, 2016 12:44
Also forgot if you have to get this far, take cover off and reseat the RAC card. This is the High failure item of IG then PS.
to rate and post a comment
John7475
re: re: re: IG problem for Brightspeed16
February 24, 2016 09:33
Hi Randy..
i will try this later..
and already clear all recon queue's but same problem
thanks for response
to rate and post a comment