Hello. I have the following problem: When I turn on the device and starts imaging software - I have this error:
https://drive.google.com/open?id=1a17x8ppAKieyMZaNhHY_fTmyb_hPGFry
I measured the LVDS cable and everything looks fine. I think, that the problem is in Camera(Innovision SF) or PC boards(IAPDB, LVDS interface board), but which one....
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
Svilen Popov
INFIMED i5 - Camera Communication failure
August 14, 2018 04:28
Hello. I have the following problem: When I turn on the device and starts imaging software - I have this error:
https://drive.google.com/open?id=1a17x8ppAKieyMZaNhHY_fTmyb_hPGFry
I measured the LVDS cable and everything looks fine. I think, that the problem is in Camera(Innovision SF) or PC boards(IAPDB, LVDS interface board), but which one....
to rate and post a comment
Svilen Popov
re: INFIMED i5 - Camera Communication failure
August 16, 2018 04:36
When I turn unit on and start the InfiView program, I have this LEDS on camera and IAPDB board:
https://drive.google.com/open?id=1wmKQFZ9ROTjrbXyTc546qFpVXGbFfvOp
https://drive.google.com/open?id=1E2AqAlj-LLLs_DXW8QKV7WDMzIORC5VS
Someone to know which leds must lights or blinking in normal work mode ???
Thank you in advance
to rate and post a comment