IU22 ERROR CODE 606

Hi sir

Need to know what cart level.
If it has 2 computers in the back(dual motherboard), this would signify that they aren’t communicating with each other.
If only one computer UMB (3 hard drives) or EMB (1 hard drive) I would replace the HDD’s .

I have already received some with this error 606, 80% had a defect in the HD sip, and older hardware had software corruption, this will depend on the type of hardware version of this iU22, as it exists, as variations (A, B, C, D, E, F, G or R), but investigate whether there is communication with the SIP subsystem with Host, using the oscilloscope if the waveform is present. I hope I have helped from a distance it is difficult to help.

I have already received some with this error 606, 80% had a defect in the HD sip, and older hardware had software corruption, this will depend on the type of hardware version of this iU22, as it exists, as variations (A, B, C, D, E, F, G or R), but investigate whether there is communication with the SIP subsystem with Host, using the oscilloscope if the waveform is present. I hope I have helped from a distance it is difficult to help.

clean the ram memory cards and sockets

606
Condition
SIP Power Failed To Initialize.
Description
Platform Monitor failed to start the System Power process.
Corrective Action
Possible causes: (1) SIP is not answering on named pipe or (2) Host
physical memory problem. Troubleshoot Dolphin IPL. See the article:
'MTE: Troubleshooting the IPL (T-00046)'.
INFO-
Hello, reconnect cable between Doplphin cards, otherwise - reinstall sw.
Is it hw B with 2 motherboards?

Code 606
Condition
SIP Power Failed To Initialize.
Description
Platform Monitor failed to start the System Power process.
Corrective Action
Possible causes: (1) SIP is not answering on named pipe or (2) Host
physical memory problem. Troubleshoot Dolphin IPL. See the article:
'MTE: Troubleshooting the IPL (T-00046)'.