We provide sales, service, rental, and repair for ultrasound systems, probes, and C-arms. We have the largest inventory in the world. Contact us about our special offers on certified refurbished equipment! Call: 317-759-9210 Email: sales@probomedical.com.
Ross Corbett
IU22 won't boot up
June 04, 2015 05:35
I have an IU22 that when turned on it beeps and the screen says "initializing hardware" it does not go beyond this screen. The system was recently moved across town so I tried redoing most of the connections in the back. Anyone have any ideas?
to rate and post a comment
EROTOKRITOS SKENTOS
re: IU22 won't boot up
June 06, 2015 04:22
This message means it does not communicate the host with the sheep.All iu22 and iu33 had a problem with the firewire cable that connects the host with the sheep.If i were you i would change that cable with a new one.
to rate and post a comment
EROTOKRITOS SKENTOS
re: IU22 won't boot up
June 07, 2015 08:39
Yesterday i repaired an iu33 with exactly the same problem with your iu22.The problem was the vga card in the host pc.Check yours you might have the same problem.
to rate and post a comment
BillWard
re: re: IU22 won't boot up
June 09, 2015 08:45
If it's the video card, swap the two cards. If that's the problem the system should power up with a touch panel display problem instead.
to rate and post a comment
Adel Adam
re: IU22 won't boot up
April 05, 2021 11:54
Dear Colleagues,
I have iU22 produced in 2009 software version Update 6.3). (It's stuck on black Screen after Initializing Hardware screen). Please help me
to rate and post a comment