I have a ethernet connection issue. The connection just drops at random times. The only way I have found to make it reconnect is to unplug the ethernet cable at the digital sensor and the reconnection will start up. This will not work if I unplug the ethernet cable at the computer. I have even made a new crossover ethernet cable to see if that was the problem. But the same thing happens. The 8000 works for a few hours then disconnects. Could I get the service manuals for this Kodak 8000 and some advice where to start. This what I have done so far. New computer with new ethernet card , excluded the virus protection to this unit. Any Ideas?
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
David McGrew PA
Kodak 8000 ethernet connection problem
July 17, 2020 10:55
I have a ethernet connection issue. The connection just drops at random times. The only way I have found to make it reconnect is to unplug the ethernet cable at the digital sensor and the reconnection will start up. This will not work if I unplug the ethernet cable at the computer. I have even made a new crossover ethernet cable to see if that was the problem. But the same thing happens. The 8000 works for a few hours then disconnects. Could I get the service manuals for this Kodak 8000 and some advice where to start. This what I have done so far. New computer with new ethernet card , excluded the virus protection to this unit. Any Ideas?
to rate and post a comment