Hey guys I am getting ERROR LSB 9 while the laser camera (Kodak XLP 100) is performing self check. Can anybody tell me its cause and remedy. I shall be very thankful.
LSB-9 error is a warning that the laser has been on for a length of time that is getting close to the expected lifespan. The remedy is to replace the laser and reset the counter. You could reset the counter but it is only a cover up. The laser is probably going to die in a short period of time.
Sell your scrap MRI magnets! Top prices, free shipping, and fast pickups. Don't let dust-collecting, idle assets go to waste. Contact: ryan.swiderski@cyclicmaterials.earth or call 437-826-1621
John Chan
Kodak XLP-100 Laser Camera Problem
May 15, 2003 01:49
Hey guys I am getting ERROR LSB 9 while the laser camera (Kodak XLP 100) is performing self check. Can anybody tell me its cause and remedy. I shall be very thankful.
to rate and post a comment
Bill Rice
Re: Kodak XLP-100 Laser Camera Problem
May 15, 2003 03:54
John,
In my notes from long ago (KELP XLP SOftware errors) S1429-000000009 reads as "film jam going to the processor, orange sensor voltage not correct".
billrice@tmeonline.com
to rate and post a comment
Charles LaChance
Re: Kodak XLP-100 Laser Camera Problem
May 15, 2003 04:32
LSB-9 error is a warning that the laser has been on for a length of time that is getting close to the expected lifespan. The remedy is to replace the laser and reset the counter. You could reset the counter but it is only a cover up. The laser is probably going to die in a short period of time.
to rate and post a comment
Maurice Dilick
Re: Kodak XLP-100 Laser Camera Problem
May 15, 2003 05:03
If they are correct about the laser, I have some thoughts.
Call me.
Dave Dilick
J & M Trading, Inc.
615-851-4229
mdilick@cris.com
to rate and post a comment