please help me.the printer kodak is shutting down itself after some time.i check the power supply at the back and the fan is running.what is the cause of the shutting down? and also After it shutdowns and turn on again it will do calibration.
do i need to replaced the power supply?before it is working ok.we just replace the processor drum fuse.it is ok tyo change the temperature of zone 123 in the mpc software without knowing the temperature of the processor drum. i dont have the device to measure the temperature of the drum.can you help me.
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
Marivic Mendoza
kodak8700
November 27, 2013 01:12
please help me.the printer kodak is shutting down itself after some time.i check the power supply at the back and the fan is running.what is the cause of the shutting down? and also After it shutdowns and turn on again it will do calibration.
to rate and post a comment
Barry Walgamotte
re: kodak8700
November 27, 2013 07:46
It's the power supply ...I .replaced many with same problem
to rate and post a comment
Marivic Mendoza
re: re: kodak8700
November 28, 2013 08:11
do i need to replaced the power supply?before it is working ok.we just replace the processor drum fuse.it is ok tyo change the temperature of zone 123 in the mpc software without knowing the temperature of the processor drum. i dont have the device to measure the temperature of the drum.can you help me.
to rate and post a comment