Hello evyone i need help with a lifepak 9 pronter, the problem is that it doestn run, when i push the record button it only moves a little and stoped, i changed the `printer but was the same , i tried the prinetr in a functional Lp9 and worked fine so the problem is the defibrilator any idea whats causing this problems' thanks
rossana diaz
lifepak 9 printer issue
June 18, 2012 02:59
Hello evyone i need help with a lifepak 9 pronter, the problem is that it doestn run, when i push the record button it only moves a little and stoped, i changed the `printer but was the same , i tried the prinetr in a functional Lp9 and worked fine so the problem is the defibrilator any idea whats causing this problems' thanks
to rate and post a comment
Alexandre Santos
re: lifepak 9 printer issue
June 18, 2012 05:55
Hello Rossana,
I have the service manual. Let me know your email address.
Best Regards,
Alexandre Santos.:
alex_henri@ig.com.br
to rate and post a comment
rossana diaz
re: re: lifepak 9 printer issue
June 19, 2012 10:19
thanks alot for you help i have it but couldnt found an answer
to rate and post a comment
Francisco Jaramillo
re: lifepak 9 printer issue
June 19, 2012 12:19
HI rossana, double check the conector between printer and equipment, some time the pins can be broked, or made false contact
to rate and post a comment
Francisco Jaramillo
re: lifepak 9 printer issue
June 19, 2012 12:19
try the conector some times this guy make problems, dust, a broked pin, false contact, email me if this doesn't work
to rate and post a comment
rossana diaz
re: re: lifepak 9 printer issue
June 19, 2012 10:20
i checked but nothing when i push the button the printer moves a little but inmediattly stops press again and moves a little nothing more
to rate and post a comment
Patricia Soto de Gibson
re: re: lifepak 9 printer issue
December 13, 2012 05:44
Hello Francisco, I am having the same problem as Rossana did with the LP9 printer. Please let me know if you were able to help her fixing it.
to rate and post a comment
Patricia Soto de Gibson
re: lifepak 9 printer issue
December 13, 2012 05:44
Hello, Rossana, I have the same problem with a LP9, where you able to find the solution? Please let me know
to rate and post a comment
Mayank Vats
re: re: lifepak 9 printer issue
July 22, 2013 10:14
Resolder all the pins of U30 IC on the mother board also use hot air gun on the mother board for warming the board
to rate and post a comment
Mayank Vats
re: re: lifepak 9 printer issue
July 22, 2013 10:14
resolder all the pins of u30 ic on mother board
to rate and post a comment
Adam Kirk
re: lifepak 9 printer issue
September 11, 2013 07:00
Hello, I am having the same problem, were you ever able to find a solution to this issue?
to rate and post a comment