hello every one
please if some one help me to solve ligasure error E1 ,26 from bipolar side,
i am unable to fix this problem please let me know
thanks,
126
127
128
MEMORY_BUTTON_DOWN
The memory button appeared to be
pressed during the powerup key test.
SEAL_UP_BUTTON_DOWN
The seal power increment button
appeared to be pressed during powerup.
SEAL_DOWN_BUTTON_DOWN
The seal power decrement button
appeared to be pressed during powerup.
Turn the power switch off (O) then on again (|). Do not press
buttons or activation devices during power up.
If the error reappears, turn off the power, disconnect the
ribbon cable that connects the front panel buttons to the
right side of the display board, and turn the power back on. If
no error appears, replace the front panel.
If the error reappears, turn off the power, disconnect the
ribbon cable that connects the display board to the control
board, and turn the power back on. If no error appears,
replace the display board.
If the error reappears, replace the control board.
Altima will inspire the trust, loyalty and commitment of our customers through positive relationships and collaboration, top quality equipment services, and a clearly superior value proposition. Call Today (469) 644-7063
sias
ligasure error E1 ,26
October 14, 2013 04:53
hello every one
please if some one help me to solve ligasure error E1 ,26 from bipolar side,
i am unable to fix this problem please let me know
thanks,
to rate and post a comment
Brian Morey
re: ligasure error E1 ,26
October 15, 2013 07:14
126
127
128
MEMORY_BUTTON_DOWN
The memory button appeared to be
pressed during the powerup key test.
SEAL_UP_BUTTON_DOWN
The seal power increment button
appeared to be pressed during powerup.
SEAL_DOWN_BUTTON_DOWN
The seal power decrement button
appeared to be pressed during powerup.
Turn the power switch off (O) then on again (|). Do not press
buttons or activation devices during power up.
If the error reappears, turn off the power, disconnect the
ribbon cable that connects the front panel buttons to the
right side of the display board, and turn the power back on. If
no error appears, replace the front panel.
If the error reappears, turn off the power, disconnect the
ribbon cable that connects the display board to the control
board, and turn the power back on. If no error appears,
replace the display board.
If the error reappears, replace the control board.
to rate and post a comment