If you have a broken Sonosite, Mindray, GE, Philips, Hitachi, or Aloka system or probe contact us today. Free ultrasound & probe EVALS with 1 Year Warranty on all repairs. We repair all orders in 1-5 days. Call 844-644-5440 Email: Sales@Lenard.Healthcare
Borhan Kalash
lightspeed 16 shutdown by itself
August 14, 2010 10:33
hope everybody is fine.
i have trouble in lightspeed 16 the system is booting but at the last stage of booting it shutdown by itself
not the console is GOC2 as i think (the console have HP computer and reconstruction box OS is Linux)
I stopped the application booting during booting and opened the shell
I made:
1- ping ice i got destination host unreachable
2- ping stc i got replay ok
3-ping obc i also got replay ok
Did anybody face the same trouble?
what do you recommend to know which part is responsible for this trouble?
Regards
to rate and post a comment
Ametepe AGBENOU
Re: lightspeed 16 shutdown by itself
August 19, 2010 10:22
I amn't sure but you have probably power supply failure in your GOC. Have you a HP 8400 PC?
to rate and post a comment
Borhan Kalash
Re: lightspeed 16 shutdown by itself
August 21, 2010 10:17
Dear Ametepe,
thank you very much
the Power Supply outputs are very good.
i have HP8000 host computer.
do you have parts for the LightSpeed16?
Regards
Borhan
to rate and post a comment
Elliot Marcus
Re: lightspeed 16 shutdown by itself
August 20, 2010 08:50
If the computer stays up without applications booted, it's very possible you have an error log that is full. Boot the OS but stop applications from booting. Try running Storelog to purge the error log. Restart the system.
to rate and post a comment
Borhan Kalash
Re: lightspeed 16 shutdown by itself
August 21, 2010 10:17
Dear Elliot,
thank you very much
booting the application done ok
but at the end of the appl. booting the system shutdown by itself
anyway i'll try to purge the log.
regards
to rate and post a comment
Elliot Marcus
Re: lightspeed 16 shutdown by itself
August 23, 2010 09:27
If purging the error log does not fix the problem, you may have a system or raw data disk.
to rate and post a comment
Helio Dibax
re: lightspeed 16 shutdown by itself
April 15, 2014 03:47
Dear, I am with the same problem in a BrightSpeed 16 with HP 8400. Do you remember wath was your solution? Can you help me?
Thanks,
Helio
to rate and post a comment
Tuy Do Duy
re: lightspeed 16 shutdown by itself
April 17, 2014 01:15
Dear
You can check cable connect from HP computer to reconstruction box, power supply of reconstruction box and ice box in reconstruction.
to rate and post a comment