LightSpeed is aborting the scans

Hi guys,

I'm having some issues with a LS Plus, whenever I perform a head protocol scan, everything goes great with the image adquisition and saving. But most of the times when I try changing to another protocol, specially with the TORAX and ABDOMEN ones, the system aborts the scan after the very first X ray exposure.

I've already changed and tested the IG in another system and is working perfectly, and changed the DARC HDDs because they were failing.

I performed the following tests and they were successfully completed:

Recon Data Path (good)
DAS Tools (good)
DDC (good)
Scan Data Path (good)

Now these are the errors that its giving me:

Error: 5
Host: darc
File: file_save_thread.cxx
OS error: 5--- Input/output error

Error: 245190
Host: ct99
File: scan_complete.cxx
Function: System Control: Scan Control
System Aborted Scout Scanning, No views, either offset or data, were collected/received.

Error: 230019006
Host: ct99
File: sdio_proxy.c
A non-zero errno was encountered during a remote system call. The system call may be failed to complete successfully or may have been interrupted. The following diagnostic information was returned.
errno:5 (Input/output error)

Error: 230000897
Host: darc
File: raw_file.cxx
Function: Data Acquisition: Scan Data Save
Write to scan data disk failed

Error: 230000030
Host: darc
File: dip_thread.cxx
Function: Data Acquisition: Scan Data Acquisition
Unable to write offset view data to the scan file.

Error: 230011075
Host: ct99
File: sdio_xfs_io_ops.c
Function: Data Acquisition: SBC Processing
Unable to open a scan file on the scan data disks. Read of scan file header failed in read()call

If anybody had this issue before or knows something else that I'm missing, please let me know.

Thanks everybody!