This message appears on the left monitor as a warning:
"Software detected with DISK SPACE.
Please complete what you are currently doing, then perform system shutdown.
Information regarding which disk partition(s) are full can be obtained from the system message log in /var/adm."
And I can not do an xray exposure. I performed the STORELOG command, then I REGENERATED the database from RECONFIG, and the RESET ImageDB, as well, and still the memory is full. Can anybody help me here, please?
Pls take the full backup.including cal files,protocols,auto voice etc.
Check the software version machine is running including patches and options.
Try reloading software and restore the backup and reinstall all options.
Thanks,
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
FranciscoG
LightSpeed Plus - Software problem
June 22, 2015 10:04
Hello,
This message appears on the left monitor as a warning:
"Software detected with DISK SPACE.
Please complete what you are currently doing, then perform system shutdown.
Information regarding which disk partition(s) are full can be obtained from the system message log in /var/adm."
And I can not do an xray exposure. I performed the STORELOG command, then I REGENERATED the database from RECONFIG, and the RESET ImageDB, as well, and still the memory is full. Can anybody help me here, please?
to rate and post a comment
Lenny Place
re: LightSpeed Plus - Software problem
June 23, 2015 09:24
have you checked your partition sizes df -h to ensure none of the partitions are to large i.e. 90%
to rate and post a comment
Vijay Sharma
re: LightSpeed Plus - Software problem
June 23, 2015 09:26
Pls take the full backup.including cal files,protocols,auto voice etc.
Check the software version machine is running including patches and options.
Try reloading software and restore the backup and reinstall all options.
Thanks,
to rate and post a comment
Wang Zhixuan
re: LightSpeed Plus - Software problem
June 24, 2015 08:42
You should try to reload the system.
to rate and post a comment