I have a GE Logic 200 Alpha that the discharged battery and lost his memory. It appears in the video Logic Aplha 200 and not start . What should I do to get out of this condition ? Where can I get the software and how to install ? Can someone help me. Thank you!
You need to connect service pc using RS232 cable, using Hyper terminal program and only set the date and some serial no setting , then it should work. You can down load the service manual from the link below
http://www.frankshospitalworkshop.com/equipment/documents/ultrasonographs/service_manuals/GE_Logiq-200_-_Service_manual.pdf
hello
i have logiq 200 this system do not go on , just appear loqiq 200 on screen and do not complete starting , i hope anybody can help me shirhan33@hotmail.com
You open your machine and check on it's dallas IC. Inside Dallas IC have a battery. Pls change IC. I'm sure it's works. No need any software because machine is ok. you can send me it's pictures then I will solve.
We work with hospitals providing reliable ultrasound systems, probes & parts. By offering sales, service, rentals & repairs, we help our clients access high quality imaging systems while keeping costs low & support simple. Please call 760-834-4777!
Giovani Caetano
Logic 200 Aplha
July 13, 2016 12:02
I have a GE Logic 200 Alpha that the discharged battery and lost his memory. It appears in the video Logic Aplha 200 and not start . What should I do to get out of this condition ? Where can I get the software and how to install ? Can someone help me. Thank you!
to rate and post a comment
bashir ahmad
re: Logic 200 Aplha
July 14, 2016 10:31
You need to connect service pc using RS232 cable, using Hyper terminal program and only set the date and some serial no setting , then it should work. You can down load the service manual from the link below
http://www.frankshospitalworkshop.com/equipment/documents/ultrasonographs/service_manuals/GE_Logiq-200_-_Service_manual.pdf
Regards
to rate and post a comment
Bruno Araujo
re:re: Logic 200 Aplha
November 24, 2016 12:27
Hi, have you ever recovered Logiq 200 with The hyperterminal? O know how to Logiq 400-500.
Best regards, Bruno
to rate and post a comment
EROTOKRITOS SKENTOS
re: Logic 200 Aplha
July 14, 2016 10:31
You do not need the software.Send me your email and i will send you the procedure you have to do when you change the battery.
to rate and post a comment
shirhan alejandro
re: re: Logic 200 Aplha
August 01, 2018 09:01
hello
i have logiq 200 this system do not go on , just appear loqiq 200 on screen and do not complete starting , i hope anybody can help me shirhan33@hotmail.com
to rate and post a comment
Hanif Bhuya
re: Logic 200 Aplha
July 14, 2016 10:31
You open your machine and check on it's dallas IC. Inside Dallas IC have a battery. Pls change IC. I'm sure it's works. No need any software because machine is ok. you can send me it's pictures then I will solve.
hanifdivine@divinemedical.tk.
to rate and post a comment